ASMXF - ASM International NV (ASMIY) Q1 2023 Earnings Call Transcript
2023-04-26 17:04:10 ET
ASM International NV (ASMIY)
Q1 2023 Earnings Conference Call
April 26, 2023, 09:00 AM ET
Company Participants
Victor Bareño - IR
Benjamin Loh - CEO
Paul Verhagen - CFO
Conference Call Participants
Robert Sanders - Deutsche Bank
Sandeep Deshpande - JPMorgan
Adithya Metuku - Credit Suisse
Francois Bouvignies - UBS
Amit Harchandani - Citi
Didier Scemama - Bank of America
Janardan Menon - Jefferies
Timm Schulze-Melander - Redburn
Tammy Qiu - Berenberg
Stephane Houri - Oddo
Ruben Devos - Kepler Cheuvreux
Marc Hesselink - ING
Nigel van Putten - Morgan Stanley
Gianmarco Bonacina - Equita
Adithya Metuku - Credit Suisse
Presentation
Operator
Good afternoon, this is the Chorus Call Conference operator. Welcome and thank you for joining the ASM International Q1 2023 Earnings Call. [Operator Instructions]
At this time, I would like to turn the conference over to Mr. Victor Bareño, Head of Investor Relations. Please go ahead, sir.
Victor Bareño
Thank you, Sherry. Good afternoon and welcome everyone to our Q1 earnings call. I'm joined here today by our CEO, Benjamin Loh; and CFO, Paul Verhagen. ASM issued its first quarter 2023 results yesterday at 6:00 PM Central European Time. For those of you who have not yet seen the press release, it is available on our website asm.com, along with our latest investor presentation.
As always, we remind you that this conference call may contain information relating to ASM's futures business and results. In addition to historical information. For more information on the risk factors related to such forward-looking statements, please refer to our company's press releases, reports and financial statements, which are available on our website.
And with that, I'll now hand the call over to Benjamin Loh, CEO of ASM.
Benjamin Loh
Thank you, Victor. And thanks to everyone for attending our first quarter 2023 results conference call. We know it is a busy day for all of you. I will follow the usual agenda for today's call, Paul will first review our first quarter financial results, I will then continue with a discussion of the market trends and outlook, followed by Q&A.
I will now turn it over to you, Paul.
Paul Verhagen
Yes. Thank you, Benjamin.
Maybe first that in my remarks I will focus on normalized results, details of the acquisition related PPA expenses and reconciliation of normalized and reported results can be found in the press release and in the investor presentation. So let's now move to the financial results. In the first quarter of '23, we delivered revenue of €710 million at constant currency, this was an increase of 40% year-on-year and unchanged compared to the fourth quarter of 2022. Revenue came in slightly above the top end of our guidance of €660 million to €700 million, due to a few shipments that were pulled in by customers from the second quarter.
Equipment revenue increased by 43% year-on-year at constant currencies led by ALD and Epi. Momentum was also strong in our vertical furnace product line, which achieved a new quarterly high in revenue. Spares and services revenue had a solid quarter, up 21% year-on-year at constant currencies.
Then in terms of customer segments, revenues led by foundry, which increased both year-on-year as compared to Q4 and at a new quarterly high. Power analog was the second largest segment, strongly up and also at a new quarterly high. Logic sales were still at a healthy level, but decreased both year-on-year and quarter-to-quarter. This was followed by the memory segment with sales substantially lower reflecting the significant cuts in investments in this markets.
Gross margin increased to an exceptionally high level of 51.1% in the quarter, up from 46.9% in the fourth quarter of '22 and 47.8% in Q1 of last year. The increase in Q1 gross margin was explained by mix, including an exceptionally rich application mix within our ALD sales and also an increased contribution of China sales.
In Q1, cost inflation further increased, although we still have some benefits from early ordering of materials that we did last year at relatively lower costs. In the following quarters, we expect an increased impact from cost inflation to a certain extent compensated by continued focus on cost reduction programs, including value reengineering and by passing on higher costs in the pricing of our tools.
SG&A expenses increased 15% compared to Q1 last year, mainly reflecting increased headcounts. The year-on-year increase in SG&A slowed down compared to the quarterly increases last year, which at that time were explained by the extra investments we made in strengthening our organization. For the full year of '23, we expect SG&A to be slightly lower compared to the run rate in Q4 of last year.
Net R&D expense increased year-on-year by 65%. Net R&D grew at a slightly faster rate than the increase of 51% in gross R&D, explained by somewhat lower increase in capitalization of R&D expenses.
The increase in R&D is explained by higher headcounts and an increased number of R&D projects. We continue to step up our investments in R&D to position ASM for the growth pipeline opportunities that we see in the mid-term. For the full year of '23, we project net R&D in line with or somewhat above the run rate of Q4 '22.
Operating profit jumped 55% year-on-year. The operating margin increased to 31.2% in Q1, driven by the exceptionally high gross margin. In line with what we communicated over Q4 results, we believe it is possible that the full year 2023 operating margin could be slightly below 26%. We remain committed to the structural target range of 26% to 31% and we expect the operating margin to move back into this range beyond 2023.
Below the operating line, financial results included a currency translation loss of €7 million. This compares to a translation gain of €9 million in the first quarter of last year and translation loss of €36 million in Q4 of last year. As most of you probably know, we hold the largest part of a cash balance in U.S. dollar and the translation differences are included in our financial results.
Then I'll move quickly to ASMPT. Our share and income from investments, reflecting a 25% share of net earnings from ASMPT amounted to €9 million in the first quarter compared to €8 million in the fourth quarter and down from €24 million in the first quarter of last year, reflecting the slowdown in the back end equivalent market.
Our report results includes an impairment reversal of €215 million. This was related to earlier impairment due to -- of the value of the stake in ASMPT in the third quarter of last year. Combined with the reversal in Q4 of last year, this impairment has now been fully reversed as per the end of Q1 and reflects the recovery in the market evaluation of ASMPT.
Now, I'll turn it back to ASM operations again. Our new orders in the first quarter were $647 million, a decrease of 6% year-on-year and a decrease of 20% in the fourth quarter at constant currencies. Towards the end of the quarter, order trends started to soften, including the impact from some pushouts in the delivery and the logic foundry segment and to a lesser extent incremental weakness in the memory segment.
Looking at the breakdown in bookings by customer segments, foundry was the largest segment followed by power, analog and logic and then memory. Combined logic, foundry orders were fairly stable compared to Q4 and year-on-year. Power, analog bookings dropped compared to Q4, both are still at a very solid level.
As a reminder, power, analog in Q4 included exceptionally high orders for LPE. Supported by strong backlog, we believe LP continues to be on track for the 2023 revenue target of more than €130 million that we communicated last quarter. Memory orders in Q1 dropped both in DRAM and NAND and were at the lowest quarterly level since 2019.
Let's now look at the balance sheet. The financial position continues to be strong, we ended the quarter with $573 million in cash up from €490 million at the end of the fourth quarter. The increase in cash was mainly driven by strong free cash flow of €155 million and this compares to a free cash flow of €99 million in Q1 of last year, excluding the cash paid for the acquisition of Reno in that quarter. This increase in free cash flow was primarily driven by increased profitability.
Working capital slightly decreased compared to the end of Q4. We have modestly higher inventories offset by lower accounts receivable. CapEx amounted to €26 million in the first quarter.
We continue to project CapEx of €150 million to €200 million for the full year, a significant part of this will be spent on infrastructure expansion, primarily for our R&D activities. This also includes the first spending related to the €100 million investment that we announced earlier to substantially expand our activities and global development center in Korea.
The 100 million share buyback program that we earlier announced will start on April 27 and it will run ultimately until November 15. And in terms of dividends as a reminder, we announced a regular dividend of €2.50 per share, similar to last year for approval by the AGM on May 15.
And with that I hand the call back over to Benjamin.
Benjamin Loh
Thank you, Paul.
If we look at the industry environment, the other parts of the semiconductor market continue to slow down in the first quarter. The uncertain economic outlook, inflation and monetary tightening further dented end market demand. Market segments such as PCs and smartphones, continue to be impacted by substantial inventory corrections. TechInsights recently lowered its forecast for the overall semiconductor market to a drop of nearly 8% in '23 compared to a decrease of 4% previously expected.
The biggest drop is forecasted for memory, but TechInsights now also predicts a small decrease for the logic foundry related part of the semiconductor market versus growth that was expected only a couple of months ago. Automotive is still a bright sport for which continued growth is expected.
Against this backdrop, our results were still good in the first quarter, as Paul just discussed. Our revenue increased somewhat more than initially expected in the first quarter driven by pull-in demand. The fact that we could ship a number of additional tools, is in part, thanks to the supply chain situation, which has improved substantially compared to last year. However, it has not yet fully normalized, as we are still facing constraints and extended lead times in specific areas such as certain components and Specialty Materials.
Logic foundry was again the key driver for us in the first quarter, as leading customers continuing to add capacity in the most advanced nodes. Supported by the record high order backlog at the end of '22, our logic, foundry sales were very robust in the first quarter.
As we highlighted on previous occasions, the new logic, foundry nodes that went into volume manufacturing in the recent periods have been positive inflections for ASM with strong double-digit increases in ALD layers and applications.
Towards the end of the quarter, demand started to soften in leading edge logic foundry and this has continued in the recent weeks. We have seen that a few customers in leading logic and foundry have started to push out some tool deliveries in certain advance notes.
In the first place, we believe that this reflects the further softening in end market conditions, although investments in the advanced nodes are part of multi-year programs, we have observed there some logic and foundry customers are taking a more prudent view to their investment plans for this year. Pushing out some tool shipments by a few quarters.
In addition, we believe that some customers have seen a delay, the completion of new fab infrastructure and as a result have shifted some of the related equipment investments from '23 into '24. This softening trend in demand impacted our order intake at the end of the quarter. We expect these pushouts to have a more pronounced impact on orders in the second and the third quarters.
To be sure, despite the decrease in the second half, overall investments in leading edge logic and foundry will still be at a very decent level in full year '23. We still expect our strong exposure and leading position in logic and foundry to drive an outperformance for ASM relative to WFE this year. For the next year, our view is unchanged. The leading-edge logic and foundry will remain an important growth market for our company.
Importantly, we have not seen a change in our customers' focus to move to the next nodes. [indiscernible] energy, technology is expected to enable further improvements in device performance and power efficiency, which in turn will be the key for future data-intensive applications such as in AI.
We believe customers finalization of the gate-all-around process is on track with volume introduction plan for 2025. We expect gate-all-around related demand to start supporting our orders from the end of '23. We have already secure tool of record selections for what we believe to be critical and high growth ALD applications in gate-all-around devices. In Epi, we also strongly engaging leading customers, we expect gate-all-around to drive further share gains.
In the memory market, market conditions further worsen in the first quarter, evidenced by further pressure on memory prices. Memory customers are not only cutting down on investments, but have also been lowering their production and utilization levels in order to reduce excess inventories. CapEx is currently largely limited to some modest technology investments. We do not anticipate a meaningful recovery in memory spending in the remainder of the year. Memory WFE is expected to be down by a significant double-digit percentage this year.
Looking beyond the current downturn, we believe that ASM is going to benefit, once memory spending recovers. Last year we won a number of new positions in 3D NAND with our ALD gap fill solutions. In DRAM, we expect a further increase in High-K Metal Gate adoption in the next node transitions. In addition, we have expanded our R&D engagements for new applications in next generation DRAM and higher stack 3D NAND, which we expect to further strengthen our position in memory ALD.
The trend in the analog power sector remains solid. Consumer related applications are weak, but automotive related demand continues to be very strong. Revenue in this segment increased strongly for us, even excluding LPE. In the power analog segment, we also benefiting from strong momentum with our products. Our intrepid ESA tool for 300 millimeter power and wafer manufacturers continues to do very well.
Demand for SONORA, our new 300 millimeter vertical furnace that we launched last year, is also very strong with both existing and newly won power analog customers. With multiple SONORA systems shipped, we had record high vertical furnace sales in the first quarter. A meaningful driver for our power analog and wafer business is also the Chinese market. As just discussed by Paul, the contribution of China to our sales increased in the first quarter both compared to the fourth quarter and year-on-year.
In addition to power, analog, our sales also increase in the logic, foundry segment of the Chinese market. In part, this reflected the impact from the re-bookings in the fourth quarter. As a reminder, in the third quarter, we conservatively devas the backlog by taking our all orders for the Chinese market that could be impacted by the export controls that were announced on October 7. At the end of November, we announced our assessment then estimated 15% to 25% of our China sales would be impacted by the export controls.
We subsequently rebooked the orders that we could still ship, fully complying with all rules and regulations. A meaningful part of this rebookings contributed to sales in the first quarter. Some customers in the Chinese market continue to invest in equipment for the relatively advanced nodes, which have not been impacted by export regulations, while we believe that some other customers have decided to shift their focus to somewhat less advanced nodes.
At the same time, we have also noticed a much stronger increase in logic and foundry fab projects in the older technology nodes, such as 45 nanometer and older. Our participation in the older nodes is limited to the niche segments of power, analog and wafer manufacturers. Where we have achieved a solid position as just discussed with our vertical furnace and Epi solutions. However, in order node logic and foundry nodes, ASM is relatively under exposed, so we don't really benefit from increased investments in that area.
Next moving out to LPE, let me provide you with an update on LPE. We believe the products and technologies that LPE has in manufacturing and also in development are very competitive. Now the LPE is part of the ASM Group, we already are seeing tangible benefits for customers such as strengthened global customer support. We are seeing a strong increase in R&D engagements for next generation 200 millimeter tools. Now we virtually all of the leading players in the silicon carbide sector.
Last quarter we already mentioned, the first orders from a new U.S. customer and we believe, we are very well placed for additional customer wins in the coming periods. But this year, as mentioned earlier, we continue to expect strong growth for LPE. We have revenue in excess of €130 million. For the coming years, we expect LPE to further strengthen its position in the fast-growing silicon carbide market.
Now turning to the outlook. Following strong revenue in the first quarter, we expect sales to remain at a good level of €650 million to €690 million in the second quarter at constant currencies and again, supported by our strong order backlog. The trend in logic and foundry softened towards the end of the quarter with some push outs in advanced node investments.
This had a limited impact on first quarter orders with a more pronounced impact expected on second and third quarter orders. Due to push outs in leading-edge logic and foundry and to a lesser extent further weakness in memory, we now expect our revenue in the second half to decrease by 10% or more compared to the level in the first half at constant currencies.
This compares to our previous expectation for somewhat lower revenue in the second half. For the year as a whole, we expect our revenue to increase by a single-digit percentage, including LPE and at constant currencies. This compares to the WFE market, which is now expected to drop by a high-teens percentage in '23. For a market in total, the impact of push outs in advanced node spending is partly compensated by increase, mature node spending in logic and foundry, especially in China, but this is a market where we have only limited exposure.
The longer-term trends remain positive for our company. Despite the correction in '23, structural growth is expected for the semiconductor market, driven by new applications in cloud computing, artificial intelligence and electric cars. Our customers remain committed to their technology road maps. The next generation devices with higher density will be enabled by new 3D architectures. Further miniaturization and new materials, which in turn will drive increasing ALD and Epi requirements.
In logic and foundry, the gate-all-around transition will drive a significant increase in ALD applications and opportunities to further increase our Epi market share. In memory, we expect to increase our ALD position in next generation DRAM and 3D NAND devices. In power analog, we have significantly expanded our position and with silicon carbide, we have added the new growth engine to our portfolio.
With that, we finished our introduction, let's now move on to the Q&A.
Victor Bareño
We would like to ask you to please limit your questions to not more than two at a time, so that everyone has a chance to answer your question. All right, Sherry, we are ready for the first question.
Question-and-Answer Session
Operator
Thank you, sir. The first question comes from Robert Sanders of Deutsche Bank.
Robert Sanders
Yes, thanks for taking my question. I guess the first question would just be on the China business, domestic China business this year. I think ASML has talked about their business doubling in the current year versus last year. I was just wondering, if you could give us some feel about how much growth you're going to see in the domestic China business in the current year? And I have follow-up. Thanks.
Benjamin Loh
Thanks a lot. So, as we explained a little bit earlier, I think we will see probably more business coming in from China compared to the previous years, but it's not going to be at the same level as what perhaps a lot of our peers have mentioned. And this is explained by the stuff that really in what we call mature nodes, 45 nanometer and above. There is very little play for us there. I mean you don't really need of ALD at 45, 65, 90 nanometers. So there is very limited exposure for us. So some of our peers that would be benefiting from that, but very much less for us.
Robert Sanders
Got it. On the follow up would just be around OpEx. If I just take your comment that you expect to be just below the bottom end of your profit margin guidance of 26% and upwards. Does that mean your OpEx will actually grow not that much this year, maybe 10%. Just can you give us some idea of how do you think OpEx will grow in this year? Thanks.
Paul Verhagen
Of course for OpEx our target for the year will be that we keep, let's say, SG&A costs somewhat below the Q4 run rate, last year Q4 was $75 million and our target is to actually stay just below that in the coming quarters. Q1 was maybe lower than what you should think of, but its expected and target to be below the $75 million, somewhat below to $75 million. Then for R&D, Q4 was also at $75 million. I would expect that to be more or less the run rate for 2023 with some pluses and minuses from quarter-to-quarter. But for the full year, I would expect more or less Q4 run rates for '23.
Robert Sanders
Thanks a lot.
Benjamin Loh
Thank you, Rob.
Operator
The next question is from Sandeep Deshpande of JPMorgan.
Sandeep Deshpande
Yes. Hi, thanks for letting me on. My first question is on your backlog, when we look at your backlog at the end of last year and the order intake you had in Q1, you were only a couple of 100 million of orders away from what the consensus revenue for the year was. So can you talk about, has the backlog being pushed out or canceled. And then secondly, with regard to your guidance on the second half that sales are slightly softer than what you had previously guided to. Can you talk about the companies where you're seeing this? Thank you.
Benjamin Loh
Sandeep, thanks a lot. So on the first question. Yes, I think we have some push outs, we probably have some adjustments in the backlog. And as we have always explained, what we report as backlog is only what needs to be delivered over the next 12 months. So I -- should anything drop out or let's say you get pushed out more than 12 months that we will have to take that out and that is the adjustment that we have done as far as the backlog is concerned at the end of Q1.
On the second half, the way that we look at this and we have really tried to give a pretty good view of what we think is going to happen. So a couple of things here. One of course, we look at some of the logic and foundry, the leading edge logic and foundry push outs.
Some of them do have an impact and we made an adjustment for that. And of course, it's our view that I think memory is going to continue to be weak. The rest should hold up pretty well and with that we kind of changed our guidance. Previously, we said it will be somewhat lower than the first half, but now we think that you'll be at 10% or more. So that's the reason why we changed the second half guidance.
Sandeep Deshpande
Thank you.
Operator
The next question comes from Adithya Metuku of Credit Suisse.
Adithya Metuku
Yes, good afternoon guys. Thank you for taking my questions. Just firstly, just on the revenues. I just wondered, if you could talk a bit about the second half, how you see the revenue split between third and fourth quarters? You're thinking third quarter will be the trough or do you think it will take a bit longer than that? And secondly, I just wondered, if you could give us some color on the eval tools, which went up sequentially in the quarter. Any color on which products and end markets drove the increase in eval tools would be helpful and I have a follow-up, if I'm allowed to ask it. Thank you.
Benjamin Loh
Adi, thanks a lot. I don't think we will give split breakdown between the third and the fourth quarter. I think, we have shared whatever we could base on our view realistically what potentially could happen in the second half, combination of Q3 and Q4.
So hopefully that suffice. On the EVL tools, you are correct. Maybe let me explain what is really happening in terms of the technology development, which actually drives the EVL tools. So of course, we are right in the thick of working together with all three customers on the -- let's say, first generation of gate-all-around.
And some of those tools, some of the eval backlog or let's say a balance is of course for tools that are still there and they are still in the process of development and evaluation. By the same time, we are increasing eval tools that will be used now going forward over the next couple of quarters as we ship them for second generation gate-all-around.
So I think I previously shared that all three customers are very active and besides just finishing off the first generation of gate-all-around, work has already started on the second generation gate-all-around. And that's actually helping, in other words, causing the increase in the -- let's say, balance of eval tools.
Net-net, it's a very positive for us, because we are heavily involved with all of them right in the thick of things and you will take couple of years especially for second-generation gate-all-around. But if are not in it -- if you are not in there now, then you don't have a chance, so we are starting very early.
Adithya Metuku
Understood. I've got another question, if I'm allowed to ask you or shall I join the queue again?
Victor Bareño
Could you please rejoin the queue.
Adithya Metuku
Sure. Thank you.
Operator
The next question is from Francois Bouvignies of UBS.
FrancoisBouvignies
Hi. Thank you very much. So my first question is on product to get around. So you mentioned in the release that you will probably see some orders by the end of the year from gate-all-around. Now if we look at what Lam Research said to be clear, they said they got some multiple customer wins on the ALD locate spacer and that catered is driving some kind of orders. Can you explain maybe why you maybe being a leader in ALD, you would probably see that at the same time and what magnitude -- can you help us on the magnitude of orders you would get beginning of the year?
And the second question is on your gross margin, obviously, significantly higher than maybe most of us expected. And you mentioned two reasons for that is the mix in China and within ALD and I was wondering China is going to probably continue, I mean in terms of trend at the moment. So I wouldn't expect the mix to change from China. But what about ALD mix, in other words, the mix that we have seen in Q1 should we expect a drastic change in the next few quarters? Thank you.
Benjamin Loh
Thank you. Francois. So maybe I'll take the gate-all-around questions and Paul can give you more color on the gross margin. So first of all on the gate-all-around, let's say penetration. So all three of them are in the phase where they are fast approaching the finalization of the process. Now the way this works is, some of the work there is done is to evaluations, to joint development. But they also buy a couple of tools themselves and we do have some of that as well.
Not specific to what you had mentioned about one of our peers, claiming that they have been winning certain applications. We are actually very confident of maintaining our market share, which is the largest in leading-edge logic and foundry. And, of course, there will be some wins, some losses, but we are very confident that we will maintain our leading position there. So we are not so concerned about that.
In terms of the timing for ordering, so I think if you look back and say, look, all three of them are messaging the high volume manufacturing will start in -- will be in 2025 and then you look back maybe another year where they start pilot manufacturing, you are correct. We do expect to see at least the orders for get all of our pilot happening or starting from the end of this year.
Paul Verhagen
Yes. Let me then take the question on gross margin. So indeed there is a few reasons for -- but I would say an exceptional high margin in Q1. As you already mentioned, we had a very strong mix within ALD which for sure we will not have every year quarter, just to make that clear. The mix in China was good and strong, which helped a lot but also given that we had some re-bookings that were basically taken out end of last year, I think that the China sales in Q1, although China sales will continue as you say, but maybe not to the same level as in Q1, that's still to be seen.
And there was also a third reason, especially looking forward, in Q1, we still had the benefit of let's say some benefit of these of advanced purchase of materials where there was some cost inflation, but not let's say to the extent that we expect to see that in the subsequent quarters. While at the same time already in Q1, we had some benefit from increased sales prices already. So there were some small benefits from that part as well, which will be a little bit less going forward into the coming quarters. Having said that the margins will still remain nicely within our guided range in the quarters to come, so that should definitely be the case, but it's very unlikely that you will see a similar level as Q1.
FrancoisBouvignies
Great. Thank you very much.
Operator
The next question comes from Amit Harchandani of Citi.
Amit Harchandani
Thank you. Good afternoon and good morning, all. Amit Harchandani from Citi. Two questions if I may. My first question goes to the topic of push-outs, and your backlog evolution. And I'm trying to join the dots and figure out what's the level of visibility you may have today looking towards 2024? For example, the push-outs, which are going out of your backlog, do you get the sense they are still there, but due for shipments next year? When you talk to your memory customers, is there any talk of rebound anything on power and analog. So my first question really is, what's the level of visibility and confidence you have in 2024 particularly because you also did say that you expect the operating margin to go back up beyond 2023? So that would be my first question.
My second question is really more in terms of what you said earlier about cost increases. So you talked about your own costs going up. Could you give us a sense of how your own pricing negotiations are coming together? Are you a net -- is it a net headwind for you, inflation today? If not, how should we think about inflation playing out for you over the subsequent quarters? Thank you.
Benjamin Loh
Thanks a lot, Amit. So I will take the first question on the push-outs and backlog, let's say, visibility. Again what we reported in our backlog is what needs to be delivered over the next 12 months. So you are correct, some of these pushouts, especially some of the recent leading edge, so called, logic and foundry push-outs they will be pushed out probably into 2024. And there we do have visibility there, some of the let's say push-outs that happened in the past or previously for memory they may be a little bit longer, still a little bit uncertain depending on the memory recovery.
So I would say it's a mix. But generally, I would say that if we look at 2024, I think we have some visibility into how our backlog is going to convert. But to give an overall view of how 2024 is going to develop, that is still a little bit early. So we will not or we will refrain from giving any guidance as far as 2024 is concerned. Paul?
Paul Verhagen
Yes. On the pricing, I think it's fair to say, yes, is there a net benefit there from inflationary cost pressure and sales price increase that we have been implementing. As I just mentioned in -- maybe in the first quarter, maybe -- there was maybe a small net benefit because there we were still benefiting from advanced -- bill of material purchases, where we had less let's say cost inflation than what we will see in the quarters to come.
In the subsequent quarters, I think it will be more or less a wash. I don't think will be a net and net benefit. We've put a lot of work and effort in implementing sales prices. And we have been reasonably successful, I would say not everywhere, but in quite a few cases we have been successful.
And I do believe with that we will at least be able to offset inflation. But I think it goes too far to say that there would be a net benefit other than maybe Q1, but that is a different reason I just explained that was because of early purchases that we did already early last year and that we still have in inventory.
Amit Harchandani
Thank you very much.
Operator
The next question is from Didier Scemama of Bank of America.
Didier Scemama
Hey, good afternoon. Thank you very much. First question is on bookings. Can you help us understand sort of the level you think bookings could reach in Q2 or Q3, so that we have a feel for what your backlog might be at the end of the third quarter? And related to that, on your press release you mentioned that you've got a meaningfully I think stronger position around presumably versus the traditional ALD applications, and you expect that to start contributing to bookings in Q4. Should we read from this that Q4 bookings could start to inflect sequentially or you're not prepared to make that comment? Thank you.
Benjamin Loh
Didier, thanks a lot. So I think we will share that -- we have shared that basically Q1 bookings were slightly impacted by some of the logic/foundry or leading edge logic/foundry push-outs and we have also shared that this would have more impact as far as the second and the third quarter's bookings are concerned, and we'll probably just leave it as that, as we do not guide bookings anymore. The gate-all-around impact in the fourth quarter, so this is what we can say.
As the three companies start to go into preparing for pilot production, this should happen in 2024. And if you just walk back on lead time and so on, we do expect that some of these orders are going to land in the fourth quarter and we do expect that that's going to help us with the order situation. Exactly, in terms of timing whether all three of them doing at the same time, or again there is a difference of a couple of months and so on, I think that at this moment is a little bit difficult to tell.
Didier Scemama
All right. And then on the meaningfully better position in gate-all-around would you be prepared to say that once you are in volume production let's say 2025 or 2026, your gate-all-around market share let's say for ALD I guess would be better than 50% to 55% or you're not prepared to make that comment?
Benjamin Loh
It's probably, again a little bit early for us to make that kind of a guidance. But perhaps I can say, we view this way, so we do think that we are in a position where we will maintain our leading position as far as overall leading-edge logic and foundry is concerned. And based on the traction that the engagements that we have of all three main customers, we think that we are in a very good position to continue doing that.
I think once the process development is finalized, probably middle of this year or let's say a little bit in the third quarter, I think we would have a better view whether we have gained share. And I think we are prepared to share that information when we have our Investor Day later on in the second half of this year.
Didier Scemama
Thank you.
Victor Bareño
Thank you, Didier.
Operator
The next question is from Lukas Tamulevicius of Jefferies.
Janardan Menon
Hi, good afternoon. This is Janardan Menon dialing on Lukas's line. Thanks for taking the question. Two questions from me. One is on the push-outs on the foundry, logic side. Given the size of your backlog and the fact that China presumably is interested in taking equipment when they can. What are the chances that you could ship some of that pushed-out machines to customers other than those who pushed out, especially those in China? Is it that these machines have already started being built and therefore cannot be re-customized? Or is it that they're more high-end systems which cannot really be sold into China at this point in time?
Benjamin Loh
Sure, Janardan. I think it's a mixture. I think some -- if we can do it, of course, we will repurpose or reposition them to meet more let's say urgent demand. But I think in general, when you look at leading-edge logic and foundry, the ones that 5-nanometer and below, these are equipment that you -- they are slightly different I would say and that you don't need at the 28-nanometer node. So there is no one-to-one type of just repurposing.
But, of course, again, if we can, we want to do it and we have been doing that. Some of this, I would say, leading-edge logic and foundry equipment we have them -- let's say we have them in our build plans, but some of them are in various stages, some are being built, some are actually waiting to be built. So it's all over the place. I cannot give you a definite answer except that when we can repurpose, we will.
Janardan Menon
So if you can repurpose, is that upside to your current guidance or is that been some -- somewhat factored into your current guidance?
Benjamin Loh
I think if you look at 2023 as a whole, what we have guided for the first half and the guidance that we have given for the second half. I think we have given, I would say a realistic view of what potentially would happen. I think we are quite clear on the first half given that when we announce the first half type of let's say guidance, it was only two months ago, so we had a good view. Second half now we also have a better view. I think it's a pretty realistic picture. Any guidance or let's say any upsides or whatever has already been baked into the forecast.
Janardan Menon
And just a follow-up on the spares and services. It was quite a big jump quarter on quarter and well above your trend previously. Can you explain why -- what caused that jump and how sustainable is this new level of revenue? And what kind of growth we can expect there going forward?
Benjamin Loh
Yes, we had a good bump up. The spares and services, I think we grew by 21% in the last quarter. But the spares and services business, they tend to be a little bit lumpy, some quarters you see it growing much more than others. And a part of it is, of course, it depends on what kind of services customers require.
What kind of contracts we have, but at the same time also whether we are able to deliver all the spare parts that our customer want due to supply chain constraints. And that's why it makes it a little bit lumpy. Q1 just happens to be great. And we hope it will continue. But overall I think longer term, we do believe that the spares and service business is going to grow at a very nice growth rate for us over the next couple of years.
Janardan Menon
Understood. Thank you.
Operator
The next question comes from Timm Schulze-Melander of Redburn.
Timm Schulze-Melander
Hi, there. Thank you for taking my question. The first question was on tool development. You've talked about being equally engaged with customers on gate-all-around, Gen2 development. Could you maybe just talk about what kind of synergies might be available to you given that you are working with all three major players? And does that mean the R&D pressures maybe can moderate in 2024? And then I have a follow-up.
Benjamin Loh
Thanks, Timm. That's an interesting question. We, of course, are -- as far as gate-all-around the -- in terms of ALD, in terms of Epitaxy, we're probably the bigger player now. As to synergies, what we do with each customer is specific or let's say confidential to each customer. So we also cannot, for example, start sharing them around. Now, of course, internally, you could say, yes, well you have developed a specific process and you don't have to redevelop it, there is some of them.
So there are some synergistic effects. But I would also like to caution that all three customers have very different designs. And with the very different designs, there are differences in what they use in terms of the materials and the kind of -- the different kind of processes that they do. So there are some synergies, but it's not like a ton of it.
Timm Schulze-Melander
Okay, all right. Helpful. Thank you. And then just sort of playing around some of -- trying to get a handle on some of this rescheduling scaling and the comments you made around Q2 and Q3. Is the right way to think about this, it's kind of a mid-double-digit value that was rescheduled coming out of Q1 and that maybe rises to more of an upper double-digit number in Q2 -- yes, in Q3. Thank you.
Benjamin Loh
Again, we won't give specific numbers as far Q2 or second and third quarters are concerned, except to say that there will be a more pronounced impact compared to the first quarter. I think the first quarter, we came in just a few percent lower than what was consensus or let's say a couple of percentage points lower than where we ended previously. I would say that, just assume that it will be higher than that in the second and third quarter, but we won't give specific numbers.
Timm Schulze-Melander
All right. Thanks very much.
Victor Bareño
Thank you, Timm.
Operator
The next question is from Tammy Qiu of Berenberg.
Tammy Qiu
Hi, good afternoon. Thank you for taking my question. So, Benjamin, please, on your foundry and logic push-outs, can you share, is that leading-edge or that leading-edge? And also at the same time when you talk about push-out in 2024, what is the kind of margin should I be thinking about for 2024? Should I be thinking about 2024 will be adding this push-out order or 2024's order will be pushed out in 2025?
Benjamin Loh
Sure. I think, of course, whether how you define leading and leading edge, I would just say that maybe, leading edge is what you call the 3-nanometer and the gate-all-around stuff. And leading-edge is probably the 5 and the 4. Actually, we are mainly focusing on anything that is 5 and below, for us as what we call leading-edge. I think you are seeing push-outs primarily in 5 and 4. We don't really see a lot of changes. And especially gate-all-around, they are still executing to their technology roadmap, their timelines. We don't see any changes. We don't see anything that speaks to the contrary.
So the push-outs that we are seeing in what you would classify as leading edge or 5 and 4 nanometer, I would say a couple of factors that we have explained. I think we just have some customers that are being a little bit more prudent in terms of CapEx lending for this year. We are also well aware that there have been fab construction delays.
Fab construction delays, delays in getting permits, et cetera, that is kind of delaying the tool that move in. So it's a combination of factors, specific to each customer, it might be different. But that is what we are seeing today.
Tammy Qiu
Okay. How should I be thinking about 2024, please? Should I add on to 2024 number?
Benjamin Loh
Sorry, I forgot about this one. Yes, I think what -- when you look at what's happening, of course, on the 5-nanometer and below, the investment, of course, is a multiyear investment. But having said that, it is possible that even with a plan, a three to four-year ramp, sometimes things get moved out one or two quarters.
So it's not unusual, I mean that has happened already also in the past. So I think the way that the three customers looking at this is, they're going to execute according to what their roadmap is. For example, the gate-all-around high-volume manufacturing is going to land in for 2025. Now whether it lands in Q1 or whether it lands in Q3, I think there's probably some room there. But it will end in 2025. So I think that part is fairly firm.
Now if we look at 2024, for the full, I think it's a little bit early to really give full kind of guidance. I think what we are seeing is that some of the 2023 stuff that were planned for this year is being moved into 2024. We think that there is a possibility either way that there could be incremental to 2024 plans. But it also could be if the demand is not there that they might push-out, let's say what was planned in '24 a little bit further out. But at this moment, it's too early to tell and too early to say anything.
Tammy Qiu
Okay. Thank you.
Operator
The next question is from Stephane Houri of Oddo.
Stephane Houri
Yes. Hello, good afternoon. Thank you for taking my question. Actually, I've got a question on silicon carbide expectations. So for the year, you have confirmed more than €130 million. But at the same time in some communications, you were saying that 25% CAGR is becoming a little bit conservative. So can you share with us your view on the -- your future, let's say, potential in silicon carbide, talk about the commercial advancement. And today with the current capacity that you have, what kind of revenue you can reach? Thank you.
Benjamin Loh
Stephane, thanks a lot. So yes, we did share, first of all, I think -- we first of all shared that the CAGR was 25%, but we are kind of figuring out that actually the CAGR is probably higher. We don't have a specific number to share. We will probably have to wait until our Investor Day. And then we initially shared €100 million and then we upgraded this to €130 million because of much more better demand. What I can say for the silicon carbide businesses is, it's probably right now at this moment, the strongest part of anything that is in the semiconductor space, and that is primarily driven by all the electric vehicles, the renewable energy stuff, and so on.
We are very heavily engaged, especially, I would say on the 200-millimeter transition. And the 200-millimeter transition is going to be, I would say a big let's say opportunity for -- not just for LPE, but also for our competitors, because you could see fairly significant investments in 200-millimeter over the next couple of years.
And we believe that we are in a very good position because we are practically engaging with every silicon carbide device manufacturer or wafer manufacturer, and at this moment, we are involved in a lot of discussions, looking a couple of options, a straight purchase of the first tool for 200-millimeter evaluation, et cetera.
So we are right now in the think of it and over the next couple of months and hopefully, by the time we get to the Investor Day, we will be able to update everybody what is the progress. We also look at in terms of our capacity, of course, LPE in Milan was a small facility and we are trying to expand that as much as possible. But at the same time, we also having to look at what about using our other, so called, ASM facilities to help them with the increased demand so that we can add enough capacity. So all of those are being looked at the same time.
Stephane Houri
Okay. Thank you very much.
Victor Bareño
Thank you, Stephane.
Operator
The next question is from Ruben Devos of Kepler Cheuvreux.
Ruben Devos
Yes, hello. Had a question on your guidance. Basically, you've provided very helpful guidance for this year. But looking a bit further out, and I know you've talked already about leading-edge logic and foundry. But very curious if you could talk a bit about memory which you said before is a bit of a wildcard. And could you also talk about the strong spending in the older nodes within logic and foundry? And how that maybe affect your level of confidence heading into next year?
And then the second question is just on the current lead times for your orders, yes, what are they? And what is basically the current state of the supply chain? Thank you very much.
Benjamin Loh
Sure, Ruben. So maybe on the memory piece first. I think we are seeing, first of all, the memory customers messaging that they are still having a fairly difficult time with supplies going down, inventory corrections, and they have resulted to reducing let's say or cutting capacity -- production capacity, and utilization to avoid further let's say ASP deterioration. I think that's all starting to have an effect and hopefully the demand comes back and they are able to perhaps even increase the level of manufacturing.
In terms of timing, I think it's different from the memory chip manufacturers and the equipment manufacturers. We need to wait for them to add capacity. And the way that they add capacity is when they have run out of capacity on the existing nodes, they want to add capacity in the new nodes. Now, that one is a little bit more difficult to time. You are already dependent on when memory prices come back and demand comes back.
But generally, we think that as far as '23 is concerned, we will probably not see much of that and mostly it's going to be a technology addition. So while they are going to this correction phase, actually all the memory chip manufacturers are still continuing with their technology development, and we are, of course, working with them. And we do see some technology buys, which we are supplying to them.
On the mature nodes, again, this is something which is very interesting because if you look at where ASM is coming from, we are really a leading-edge type of equipment supplier. So the more leading-edge it is, the better it is for us.
So when you look at mature nodes that are let's say 28-nanometer and beyond, I know there is really a very limited play for us in that sense, because at those nodes you probably do not need ALD. You need ALD maybe just for the high-k part of it. So there isn't really a lot of play for us there.
Now where we do play in the mature nodes, which is in the old technology, which is maybe 90, 130-nanometer and so on, is in the power analog sector which we have actually been building our position nicely over the last couple of years with Epi and also with vertical furnace. And as we shared earlier, we even had a record let's say amount of revenue, as far as vertical furnace is concerned in the last quarter.
So we are doing well there. Now beyond where we are playing today, we don't really have a lot of play in terms of, let's say, 45-nanometer, 65-nanometer, logic or foundry that is actually not our, let's say, sweet spot.
In terms of lead times, I would say the lead times is getting better. We're probably coming down to the six to eight months range that is more acceptable. And in fact that we also still get a lot of pressure from customers asking us to reduce our lead times and we are doing that. But a little bit on the supply chain constraints, I think it's gotten much, much better compared to 12, 18 months ago. But again as we shared, there are weaknesses in certain components, primarily gas delivery and also in specialty materials which the weakness to persist. But we are working through that.
Ruben Devos
Thank you very much.
Victor Bareño
Thank you, Ruben.
Operator
The next question is from Marc Hesselink of ING.
Marc Hesselink
Yes, thank you. First question actually on the second generation of gate-all-around. With first generations your guided there was a quite significant step up in ALD intensity and more than usual setup. What do you expect for the gate-all-around?
Benjamin Loh
Of course, the second generation has kind of started. We think that there would be even more. I mean if we want to give our view today at this moment, we think that there will be even more usage of ALD primarily because that's even more new materials that will be -- will have to be used. New materials, generally is good for ALD. So that's where we are today. Of course, you have the usual scaling, maybe there's a little bit of change here and there that could also lead to more ALD. But overall, I think the main driver of let's say ALD intensity being increased is new materials.
Marc Hesselink
Okay, clear. And thanks. The second question is on you said there is a -- part of the order book is pushed out. Can you quantify that? How much has been pushed out that's now more than one year ahead?
Benjamin Loh
I don't think we will quantify that. But if you look at, for example, of course, those have been pushed out for more than one year. We have to adjust the backlog and then we have the new bookings coming. I would say that it's pretty evenly well-balanced stuff there has been pushed-out and I'm making a guess, I'm actually looking at Paul to see whether he knows the answer. I would say that stuff that has been pushed out more than 12 months have been balanced by the stuff that are coming in as well. So net-net, not much of change.
Marc Hesselink
Okay, clear. Thank you.
Victor Bareño
Thank you, Marc.
Operator
The next question is from Nigel van Putten of Morgan Stanley.
Nigel van Putten
Hi, good afternoon. I had a question already, a follow-up on the order behavior by your customers. So clearly, most of what you're seeing is customers reacting to a weaker environment. But I guess at the same time, the supply chain situation is also improving. So my question would be, where are your lead times now and to what extent has they improved over the past months? That's the first question. Thanks.
Benjamin Loh
Thanks, Nigel. So you are correct. We do see improvements in the supply chain. And as I mentioned earlier, we are getting back to the more normalized lead time, which is between 6 to 8 months. We are not 100% there yet, but we are getting close.
Nigel van Putten
That's 6 to 8 months. As a quick follow-up then, would there be -- what your gate-all-around tools currently in evaluation, would that be a similar lead time or would you expect that to be longer considering the tools are newer? Just also getting a sense of, if you do see those orders coming in the fourth quarter. I mean, if the customers can get those relatively quickly from you, would that be a more normalized pace from what we see maybe a couple of quarters ago or any color around that would be useful? Thanks.
Benjamin Loh
I will say it will mostly be around the same. There could be, for example, what we call a very specific application that perhaps we need to do a little bit more, which might need a little bit more time, just because of maybe we have special hardware requirements and so on that, that we need to do that. But I think the way to look at it is, it's probably the same as the other lead times or the usual the times that we have, which is getting back to a normalized state of coming close to 6 to 8 months.
Nigel van Putten
Got it. Just a quick clarification then. If you say 6 to 8 months, then the normalized backlog would also basically mean revenue for the next 2 and 2.5 quarters. Does that sort of math hold up?
Benjamin Loh
If under normal circumstances that should be the case. But you know where we have on the backlog of course, last year there was actually quite some what we call the early ordering and that's because, we had lead times for certain products that extended out to even a year. So I think as we get things normalized, supply chain gets normalized, we should be looking at that.
Nigel van Putten
Yes. Understood. It is sort of surprising to 6 to 8 months. I mean if you look back a couple years ago, then I think I remember it being more like 3 to 4 months. Also, if you compare the backlogs back then. Is that a particular reason why that's changed? Is that just the complexity of your products or is that still sort of supply chain complexity that are elevated now, sorry to put in the extra question.
Benjamin Loh
No, I think it's a mixture of -- there are several factors that you've mentioned. It is true that it is -- some of the equipment that becoming more complex, that's one. Two, supply chain has also become more complex as well. And all of that added up together, is leading to a longer let's say lead times of 6 to 8 months. Now of course, there are certain products, which are little bit faster, some which are lower. I'm just giving you an average number.
Nigel van Putten
Of course. Thanks. Appreciate it. Thank you very much.
Victor Bareño
Thank you, Nigel.
Operator
The next question is from Gianmarco Bonacina of Equita.
Gianmarco Bonacina
Yes, good afternoon. A couple for me, please. In the second half, you mentioned that you may have a 10% decline versus first half or even more. So given your backlog, what at the moment worst case scenario in terms of deviation on the downside from the 10%. Just a couple of points could be worse and what could be the -- let's say, the biggest risk here?
The second one is just on the FX impact, because you talk about let's say cost and currency. We noticed in the first quarter, you already had a headwind on effect the spot despite the U.S. dollar should have given you a tailwind.
So at current FX, what's your best guess in terms of headwind for the -- for there. Because they calculated $2.6 billion in constant currency revenue, but clearly we have to deduct also the FX side, it could be a mid-single digit or probably less? Thank you.
Benjamin Loh
Yes Marco, I will let Paul answer you on the FX scenario question. But I just wanted to clarify your question on the -- regarding the backlog. So you are saying that we have message 10% reduction in the second half and how does this impact the backlog, is that what you're asking?
Gianmarco Bonacina
No I saying, given you have a backlog, so how much worse can be minus 10, minus 15, minus 20. Because it seems you have a backlog. So it shouldn't be much worse than minus 10% at this point in time, because we are in April or you envision a scenario where actually the decline in the sales second half versus first half could be significantly more? Because in the press release, you talk about 10% or more. So what does it mean more basically just a tiny bit or could be also, let's say, a bigger deviation from this 10%.
Benjamin Loh
I think we'll leave ahead as it is. But what I can tell you Gianmarco is really, we have given in our opinion, a very realistic forecast as of today. What we know today and we do think that the 10% or more reduction in the second half is going to happen now. Of course that's based on the best view that we have today and we want to leave it at that.
Paul Verhagen
Yes, on the FX. Yes, Gianmarco if we say, let's say, if we guide, let's say, take in this case 10% or more product for the second half and we said at constant currencies what we referred to is that that based on issuance, let's say, currency level that we have seen in the first -- in the last quarter of our reporting. So in this particular case in Q1.
So if you would make the same comment in let's say after the Q2 reporting, we mean is the currency that we have seen in Q2, whatever etcetera. That's what we mean by constant currency. So we're not talking about headwinds, tailwinds, we just say we in our forecasting we always use the latest available currency and we assume that that will stay.
Because you can put an enormous amount of time and effort and debate and intellectual wisdom in trying to forecast currencies, there will be as good or as bad as keeping it the same. We keep it the same and then we'll see what happens.
But as you know in the actuals, we will always converted back in terms of growth rates at constant currency compared to prior year. But when we guide forward, we look at the last available currency over the last available quarter. I hope that's clear. But that's how we do it.
Gianmarco Bonacina
Okay, clear. And just a quick follow-up. The Q1 you had a headwind despite the U.S. dollar being -- let's say, giving you a positive effect. I guess because of shipment in other currencies. So the Q1 was kind of an anomaly or I mean is not, let's say, an anomaly in terms of counter mix the Q1?
Paul Verhagen
The revenue I believe in constant currencies, measured in constant currencies was slightly lower de growth than measured in reported currencies that further, I'm not sure.
Gianmarco Bonacina
No, I'm saying in the Q1, you had the 40% constant currency revenue growth and 37% reported. So basically you are saying you had a negative impact of FX, because you are adding these. And I noticed that actually in the Q1, other companies, they're adding a benefit from the U.S. dollar year-over-year. So probably because you are shipping in other currencies like the renminbi or the Taiwanese dollar or the -- I guess this is the case. Now you are not shipping that much in U.S. dollar, is more other currencies in this quarter.
Paul Verhagen
I don't know what the functional currencies of other companies the you refer to maybe U.S. companies basically the opposite of what we see, that's true. But the bulk of what we invoices in U.S. dollars. Not everything, but the vast majority is in U.S. dollars and compared to the level of Q1 last year, there was -- basically there was this negative impact that you just said of around 3%. If you measure it based on the reported currency, if you compare to Q4 of this year for instance sequential, there was a benefit. So it depends on the reference period that you take and it depends if you report in euros or if you report in U.S. dollars.
Gianmarco Bonacina
Okay. Now clear.
Paul Verhagen
So dollars have of course a different impact than what we have when we report in Euros.
Gianmarco Bonacina
Okay, thank you.
Benjamin Loh
Thank you, Gianmarco. Operator, can we please have the last question.
Operator
Yes, sir. The last question is a follow-up from Adithya Metuku of Credit Suisse.
Adithya Metuku
Yes, good afternoon guys. Thank you for squeezing me in. Just one question really on LPE. I just wanted to understand what drives your confidence in the share gain you're expecting in 200 millimeter silicon carbide tools. Is this based on the attributes of the tools? Is this based on what you're hearing from the customers you're engaged with? Because your competitors also seem to be pretty confident about maintaining the share, they've got. So any color you can help with on LPE share gains going forward would be very helpful. Thank you.
Benjamin Loh
Sure, Adi. I think it's a combination of all of what you have just discussed. Of course, we do our own work in terms of the performance of our tools, the cost of ownership. But at the same time, the rubber really heats the road when you go into discussions with our customers. And then you can -- you get the real feedback. And I think based on all the engagements that we have -- had so far and are still having, we -- I would say have very good responses and feedback from the customers. And that's why I think we are in very active engagements, talking to them. You better straight purchase, evaluations, joint development.
I think it's because they also see that -- look after doing some work with us, it is a good product, it has good cost of ownership and that's why they are thinking about it. So that's how we arrived in terms of our confidence for 200 millimeter.
Adithya Metuku
Thank you.
Operator
I'd like to hand it over to the CEO for any closing remarks, please.
Benjamin Loh
I just wanted to thank everybody for attending our call today. Also, on behalf of Paul and Victor, we hope to meet many of you doing one of our upcoming investor events virtually or in person. Stay safe and goodbye.
Operator
Ladies and gentlemen, thank you for joining. The conference is now over and you may disconnect your telephones.
For further details see:
ASM International NV (ASMIY) Q1 2023 Earnings Call Transcript