OM:CC - Osisko Metals Provides Drilling Update for Pine Point
MONTREAL, March 21, 2022 (GLOBE NEWSWIRE) -- Osisko Metals Incorporated (the " Company " or " Osisko Metals ") ( TSX-V: OM ; OTCQX: OMZNF ; FRANKFURT: 0B51 ) is pleased to announce further results from the definition drilling program at its Pine Point Project, located in the Northwest Territories, Canada. This program is designed to achieve an average drill spacing of approximately 30 metres and is required to upgrade deposits currently classified as Inferred Mineral Resources to the Indicated Mineral Resource category so that they can be included in a feasibility study.
Currently, the Company is nearing completion of the 2022 PEA Update that will include updated commodity prices and reduced dewatering costs.
The results reported today are from the late 2021 drill program and are located in the Central Zone and the East Mill Zone (see Map 1 and Tables 1 & 2). All intercepts were in Tabular-style mineralization and are within modelled open pit boundaries and underground stope areas.
Assays met expectations and confirmed continuity of mineralization within the current Mineral Resource areas. Further assay results are pending from the 2021 program, as well as all of the results from the 2022 Winter drill program that began in late January.
Mineralization was intersected between 82 and 50 metres vertical depth in the Central Zone and between 41 and 13 metres vertical depth in the East Mill Zone.
Highlights Include:
- Drill hole K60-21-PP-004 intersected 8.95 metres grading 11.92% Zn and 25.49% Pb (37.41% Zn+Pb).
- Drill hole M6263-21-PP-005 intersected 6.00 metres grading 14.96% Zn and 5.02% Pb (19.97% Zn+Pb).
- Drill hole N39-21-PP-022 intersected 8.00 metres grading 8.20% Zn and 0.37% Pb (8.57% Zn+Pb).
- Drill hole N39-21-PP-038 intersected 3.65 metres grading 14.04% Zn and 3.63% Pb (17.67% Zn+Pb).
Jeff Hussey, President & COO, commented: “We have now completed approximately 60% of the required infill drilling to convert all of the Inferred Mineral Resources at Pine Point to the Indicated Mineral Resource category. We are still impressed with the continuity of mineralization as the definition drilling confirms extent and grade distribution. Results to date also indicate significant potential to expand mineralization beyond current Mineral Resources through additional drilling. We look forward to the completion of the program by mid 2023 and the update to the Mineral Resource Estimate that will be concurrent to the Feasibility Study. In the short term we will be issuing the 2022 PEA update and we look forward to positive results.”
Hydrogeological Program Update
A total of thirty-eight drill holes will have been surveyed for hydrogeological purposes by the end of the 2022 winter drill program. Profile tracer tests measure water flow and that dataset will be added to the hydrogeological modelling process as we move toward the feasibility study.
Table 1: Drill Hole Composites.
| Hole Name |
| Zone |
| Deposit |
| From |
| To |
| Drill Width |
| True Width |
| Zn |
| Pb |
| Zn+Pb |
| (m) |
| (m) |
| (m) |
| (m) |
| % |
| % |
| % |
| K60-21-PP-001 |
| Central - 1 |
| K60 |
| 50.75 |
| 52.05 |
| 1.30 |
| 1.30 |
| 4.24 |
| 2.63 |
| 6.86 |
| K60-21-PP-002 |
| Central - 1 |
| K60 |
| 55.40 |
| 56.10 |
| 0.70 |
| 0.70 |
| 1.91 |
| 0.11 |
| 2.02 |
| K60-21-PP-004 |
| Central - 1 |
| K60 |
| 50.65 |
| 59.60 |
| 8.95 |
| 8.95 |
| 11.92 |
| 25.49 |
| 37.41 |
| K60-21-PP-005 |
| Central - 1 |
| K60 |
| 61.20 |
| 62.60 |
| 1.40 |
| 1.40 |
| 9.66 |
| 1.33 |
| 10.99 |
| K60-21-PP-006 |
| Central - 1 |
| K60 |
| 59.00 |
| 60.00 |
| 1.00 |
| 1.00 |
| 1.78 |
| 0.37 |
| 2.14 |
| K60-21-PP-007 |
| Central - 1 |
| K60 |
| 57.20 |
| 58.20 |
| 1.00 |
| 1.00 |
| 19.05 |
| 2.01 |
| 21.06 |
| K60-21-PP-007 |
| Central - 1 |
| K60 |
| 62.15 |
| 63.00 |
| 0.85 |
| 0.85 |
| 10.05 |
| 1.67 |
| 11.72 |
| K60-21-PP-007 |
| Central - 1 |
| K60 |
| 66.20 |
| 66.60 |
| 0.40 |
| 0.40 |
| 2.15 |
| 2.69 |
| 4.84 |
| K60-21-PP-007 |
| Central - 1 |
| K60 |
| 69.00 |
| 69.50 |
| 0.50 |
| 0.50 |
| 3.50 |
| 0.54 |
| 4.04 |
| Hole Name |
| Zone |
| Deposit |
| From |
| To |
| Drill Width |
| True Width |
| Zn |
| Pb |
| Zn+Pb |
| (m) |
| (m) |
| (m) |
| (m) |
| % |
| % |
| % |
| M6263-21-PP-003 |
| Central - 1 |
| M6263 |
| 72.34 |
| 73.34 |
| 1.00 |
| 1.00 |
| 2.80 |
| 0.45 |
| 3.25 |
| M6263-21-PP-005 |
| Central - 1 |
| M6263 |
| 64.65 |
| 70.65 |
| 6.00 |
| 6.00 |
| 14.96 |
| 5.02 |
| 19.97 |
| M6263-21-PP-006 |
| Central - 1 |
| M6263 |
| 67.00 |
| 68.00 |
| 1.00 |
| 1.00 |
| 2.78 |
| 6.75 |
| 9.53 |
| M6263-21-PP-006 |
| Central - 1 |
| M6263 |
| 81.00 |
| 82.00 |
| 1.00 |
| 1.00 |
| 13.05 |
| 0.20 |
| 13.25 |
| M6263-21-PP-008 |
| Central - 1 |
| M6263 |
| 59.05 |
| 61.55 |
| 2.50 |
| 2.50 |
| 6.40 |
| 0.70 |
| 7.11 |
| M6263-21-PP-008 |
| Central - 1 |
| M6263 |
| 63.05 |
| 66.05 |
| 3.00 |
| 3.00 |
| 10.85 |
| 0.47 |
| 11.32 |
| M6263-21-PP-017 |
| Central - 1 |
| M6263 |
| 61.45 |
| 65.45 |
| 4.00 |
| 4.00 |
| 8.35 |
| 0.61 |
| 8.96 |
| M6263-21-PP-018 |
| Central - 1 |
| M6263 |
| 58.81 |
| 59.81 |
| 1.00 |
| 1.00 |
| 16.40 |
| 27.57 |
| 43.97 |
| M6263-21-PP-019 |
| Central - 1 |
| M6263 |
| 57.66 |
| 58.66 |
| 1.00 |
| 1.00 |
| 0.05 |
| 9.54 |
| 9.59 |
| M6263-21-PP-020 |
| Central - 1 |
| M6263 |
| 58.55 |
| 62.55 |
| 4.00 |
| 4.00 |
| 11.14 |
| 0.46 |
| 11.60 |
| M6263-21-PP-021 |
| Central - 1 |
| M6263 |
| 65.50 |
| 66.50 |
| 1.00 |
| 1.00 |
| 0.17 |
| 0.02 |
| 0.19 |
| M6263-21-PP-022 |
| Central - 1 |
| M6263 |
| 57.85 |
| 58.50 |
| 0.65 |
| 0.65 |
| 1.31 |
| 0.02 |
| 1.33 |
| Hole Name |
| Zone |
| Deposit |
| From |
| To |
| Drill Width |
| True Width |
| Zn |
| Pb |
| Zn+Pb |
| (m) |
| (m) |
| (m) |
| (m) |
| % |
| % |
| % |
| M40-21-PP-001 |
| East Mill |
| M40 |
| 33.00 |
| 38.00 |
| 5.00 |
| 5.00 |
| 4.55 |
| 5.16 |
| 9.71 |
| N39-21-PP-009 |
| East Mill |
| N39 |
| 21.00 |
| 21.70 |
| 0.70 |
| 0.70 |
| 13.70 |
| 4.05 |
| 17.75 |
| N39-21-PP-009 |
| East Mill |
| N39 |
| 25.50 |
| 29.00 |
| 3.50 |
| 3.50 |
| 10.75 |
| 0.74 |
| 11.49 |
| N39-21-PP-011 |
| East Mill |
| N39 |
| 29.15 |
| 29.65 |
| 0.50 |
| 0.50 |
| 10.15 |
| 1.28 |
| 11.43 |
| N39-21-PP-012 |
| East Mill |
| N39 |
| 24.63 |
| 25.13 |
| 0.50 |
| 0.50 |
| 6.19 |
| 0.63 |
| 6.82 |
| N39-21-PP-014 |
| East Mill |
| N39 |
| 41.50 |
| 42.00 |
| 0.50 |
| 0.50 |
| 0.35 |
| 0.00 |
| 0.35 |
| N39-21-PP-015 |
| East Mill |
| N39 |
| 26.00 |
| 28.00 |
| 2.00 |
| 2.00 |
| 10.66 |
| 3.65 |
| 14.30 |
| N39-21-PP-018 |
| East Mill |
| N39 |
| 26.30 |
| 27.30 |
| 1.00 |
| 1.00 |
| 11.45 |
| 1.00 |
| 12.45 |
| N39-21-PP-018 |
| East Mill |
| N39 |
| 30.80 |
| 31.80 |
| 1.00 |
| 1.00 |
| 6.94 |
| 0.72 |
| 7.66 |
| N39-21-PP-022 |
| East Mill |
| N39 |
| 15.30 |
| 23.30 |
| 8.00 |
| 8.00 |
| 8.20 |
| 0.37 |
| 8.57 |
| N39-21-PP-029 |
| East Mill |
| N39 |
| 24.43 |
| 26.43 |
| 2.00 |
| 2.00 |
| 11.78 |
| 1.83 |
| 13.60 |
| N39-21-PP-030 |
| East Mill |
| N39 |
| 25.00 |
| 26.00 |
| 1.00 |
| 1.00 |
| 11.30 |
| 6.17 |
| 17.47 |
| N39-21-PP-031 |
| East Mill |
| N39 |
| 26.35 |
| 27.35 |
| 1.00 |
| 1.00 |
| 18.55 |
| 1.89 |
| 20.44 |
| N39-21-PP-032 |
| East Mill |
| N39 |
| 23.00 |
| 26.76 |
| 3.76 |
| 3.76 |
| 8.48 |
| 1.20 |
| 9.68 |
| N39-21-PP-033 |
| East Mill |
| N39 |
| 28.00 |
| 31.00 |
| 3.00 |
| 3.00 |
| 4.14 |
| 0.43 |
| 4.57 |
| N39-21-PP-034 |
| East Mill |
| N39 |
| 28.00 |
| 28.80 |
| 0.80 |
| 0.80 |
| 1.89 |
| 0.11 |
| 2.00 |
| N39-21-PP-035 |
| East Mill |
| N39 |
| 27.00 |
| 28.00 |
| 1.00 |
| 1.00 |
| 1.76 |
| 0.02 |
| 1.78 |
| N39-21-PP-036 |
| East Mill |
| N39 |
| 27.60 |
| 28.10 |
| 0.50 |
| 0.50 |
| 2.25 |
| 1.29 |
| 3.54 |
| N39-21-PP-037 |
| East Mill |
| N39 |
| 23.20 |
| 24.00 |
| 0.80 |
| 0.80 |
| 5.78 |
| 3.96 |
| 9.74 |
| N39-21-PP-038 |
| East Mill |
| N39 |
| 19.65 |
| 23.30 |
| 3.65 |
| 3.65 |
| 14.04 |
| 3.63 |
| 17.67 |
| N39-21-PP-039 |
| East Mill |
| N39 |
| 21.30 |
| 23.30 |
| 2.00 |
| 2.00 |
| 5.86 |
| 1.80 |
| 7.66 |
| N39-21-PP-040 |
| East Mill |
| N39 |
| 30.00 |
| 30.70 |
| 0.70 |
| 0.70 |
| 0.34 |
| 0.00 |
| 0.34 |
| N39-21-PP-042 |
| East Mill |
| N39 |
| 31.50 |
| 32.00 |
| 0.50 |
| 0.50 |
| 6.70 |
| 0.30 |
| 7.00 |
| N39-21-PP-044 |
| East Mill |
| N39 |
| 15.00 |
| 16.00 |
| 1.00 |
| 1.00 |
| 15.80 |
| 0.74 |
| 16.54 |
| N39-21-PP-041 |
| East Mill |
| N39 |
| 30.14 |
| 30.64 |
| 0.50 |
| 0.50 |
| 11.60 |
| 26.29 |
| 37.89 |
| N39-21-PP-043 |
| East Mill |
| N39 |
| 15.00 |
| 16.00 |
| 1.00 |
| 1.00 |
| 7.30 |
| 0.27 |
| 7.57 |
| N39-21-PP-043 |
| East Mill |
| N39 |
| 27.00 |
| 27.50 |
| 0.50 |
| 0.50 |
| 6.88 |
| 0.99 |
| 7.87 |
| N39-21-PP-044 |
| East Mill |
| N39 |
| 15.00 |
| 16.00 |
| 1.00 |
| 1.00 |
| 15.80 |
| 0.74 |
| 16.54 |
| N39-21-PP-045 |
| East Mill |
| N39 |
| 27.15 |
| 28.10 |
| 0.95 |
| 0.95 |
| 3.56 |
| 0.45 |
| 4.01 |
| Hole Name |
| Zone |
| Deposit |
| From |
| To |
| Drill Width |
| True Width |
| Zn |
| Pb |
| Zn+Pb |
| (m) |
| (m) |
| (m) |
| (m) |
| % |
| % |
| % |
| L27-21-PP-001 |
| East Mill |
| L27 |
| 17.50 |
| 18.50 |
| 1.00 |
| 1.00 |
| 5.66 |
| 1.06 |
| 6.72 |
| L27-21-PP-002 |
| East Mill |
| L27 |
| 16.00 |
| 17.00 |
| 1.00 |
| 1.00 |
| 12.55 |
| 2.48 |
| 15.03 |
| Hole Name |
| Zone |
| Deposit |
| From |
| To |
| Drill Width |
| True Width |
| Zn |
| Pb |
| Zn+Pb |
| (m) |
| (m) |
| (m) |
| (m) |
| % |
| % |
| % |
| L35-21-PP-011 |
| East Mill |
| L35 |
| 39.00 |
| 41.05 |
| 2.05 |
| 2.05 |
| 12.66 |
| 4.07 |
| 16.73 |
| L35-21-PP-012 |
| East Mill |
| L35 |
| 35.80 |
| 36.40 |
| 0.60 |
| 0.60 |
| 8.65 |
| 0.37 |
| 9.02 |
| L35-21-PP-012 |
| East Mill |
| L35 |
| 41.40 |
| 43.10 |
| 1.70 |
| 1.70 |
| 11.51 |
| 0.29 |
| 11.80 |
| L35-21-PP-013 |
| East Mill |
| L35 |
| 34.00 |
| 35.00 |
| 1.00 |
| 1.00 |
| 8.21 |
| 0.82 |
| 9.03 |
| L35-21-PP-014 |
| East Mill |
| L35 |
| 30.00 |
| 31.00 |
| 1.00 |
| 1.00 |
| 10.70 |
| 1.80 |
| 12.50 |
| L35-21-PP-014 |
| East Mill |
| L35 |
| 36.00 |
| 39.25 |
| 3.25 |
| 3.25 |
| 5.59 |
| 2.10 |
| 7.69 |
| L35-21-PP-015 |
| East Mill |
| L35 |
| 29.00 |
| 30.00 |
| 1.00 |
| 1.00 |
| 0.19 |
| 10.50 |
| 10.69 |
| L35-21-PP-016 |
| East Mill |
| L35 |
| 33.00 |
| 34.00 |
| 1.00 |
| 1.00 |
| 4.40 |
| 0.65 |
| 5.05 |
| L35-21-PP-017 |
| East Mill |
| L35 |
| 30.00 |
| 30.50 |
| 0.50 |
| 0.50 |
| 0.94 |
| 0.21 |
| 1.15 |
| L35-21-PP-018 |
| East Mill |
| L35 |
| 24.00 |
| 24.65 |
| 0.65 |
| 0.65 |
| 9.00 |
| 0.03 |
| 9.03 |
| L35-21-PP-019 |
| East Mill |
| L35 |
| 24.00 |
| 25.00 |
| 1.00 |
| 1.00 |
| 0.73 |
| 0.09 |
| 0.81 |
| L35-21-PP-020 |
| East Mill |
| L35 |
| 17.85 |
| 18.55 |
| 0.70 |
| 0.70 |
| 1.16 |
| 0.01 |
| 1.17 |
| L35-21-PP-021 |
| East Mill |
| L35 |
| 30.20 |
| 31.25 |
| 1.05 |
| 1.05 |
| 10.30 |
| 1.05 |
| 11.35 |
| L35-21-PP-022 |
| East Mill |
| L35 |
| 23.72 |
| 24.20 |
| 0.48 |
| 0.48 |
| 16.20 |
| 3.83 |
| 20.03 |
| L35-21-PP-023 |
| East Mill |
| L35 |
| 28.00 |
| 29.00 |
| 1.00 |
| 1.00 |
| 2.46 |
| 0.12 |
| 2.58 |
| L35-21-PP-025 |
| East Mill |
| L35 |
| 13.00 |
| 14.00 |
| 1.00 |
| 1.00 |
| 17.75 |
| 0.16 |
| 17.91 |
| L35-21-PP-025 |
| East Mill |
| L35 |
| 19.00 |
| 22.50 |
| 3.50 |
| 3.50 |
| 5.33 |
| 0.70 |
| 6.04 |
| L35-21-PP-025 |
| East Mill |
| L35 |
| 25.00 |
| 26.10 |
| 1.10 |
| 1.10 |
| 6.30 |
| 0.62 |
| 6.92 |
| L35-21-PP-026 |
| East Mill |
| L35 |
| 24.00 |
| 24.50 |
| 0.50 |
| 0.50 |
| 12.05 |
| 12.45 |
| 24.50 |
| L35-21-PP-028 |
| East Mill |
| L35 |
| 18.60 |
| 19.60 |
| 1.00 |
| 1.00 |
| 1.62 |
| 0.08 |
| 1.70 |
| L35-21-PP-029 |
| East Mill |
| L35 |
| 23.00 |
| 27.00 |
| 4.00 |
| 4.00 |
| 9.23 |
| 0.57 |
| 9.80 |
| L35-21-PP-029 |
| East Mill |
| L35 |
| 36.70 |
| 37.20 |
| 0.50 |
| 0.50 |
| 4.44 |
| 0.77 |
| 5.21 |
| L35-21-PP-030 |
| East Mill |
| L35 |
| 16.00 |
| 17.00 |
| 1.00 |
| 1.00 |
| 2.38 |
| 0.93 |
| 3.31 |
| L35-21-PP-031 |
| East Mill |
| L35 |
| 12.00 |
| 14.00 |
| 2.00 |
| 2.00 |
| 8.14 |
| 3.88 |
| 12.01 |
| L35-21-PP-031 |
| East Mill |
| L35 |
| 16.00 |
| 17.10 |
| 1.10 |
| 1.10 |
| 10.05 |
| 1.30 |
| 11.35 |
| L35-21-PP-032 |
| East Mill |
| L35 |
| 38.00 |
| 39.50 |
| 1.50 |
| 1.50 |
| 14.45 |
| 2.36 |
| 16.80 |
| L35-21-PP-033 |
| East Mill |
| L35 |
| 14.00 |
| 16.00 |
| 2.00 |
| 2.00 |
| 4.54 |
| 0.62 |
| 5.16 |
| Hole Name |
| Zone |
| Deposit |
| From |
| To |
| Drill Width |
| True Width |
| Zn |
| Pb |
| Zn+Pb |
| (m) |
| (m) |
| (m) |
| (m) |
| % |
| % |
| % |
| N32-21-PP-001 |
| East Mill |
| N32 |
| 22.45 |
| 23.45 |
| 1.00 |
| 1.00 |
| 0.30 |
| 0.82 |
| 1.12 |
| N32-21-PP-002 |
| East Mill |
| N33 |
| 17.00 |
| 17.50 |
| 0.50 |
| 0.50 |
| 0.41 |
| 0.40 |
| 0.81 |
| N32-21-PP-003 |
| East Mill |
| N34 |
| 26.00 |
| 26.90 |
| 0.90 |
| 0.90 |
| 3.92 |
| 0.19 |
| 4.11 |
| N32-21-PP-004 |
| East Mill |
| N35 |
| 15.35 |
| 16.35 |
| 1.00 |
| 1.00 |
| 0.37 |
| 1.52 |
| 1.88 |
| N32-21-PP-005 |
| East Mill |
| N36 |
| 19.35 |
| 22.60 |
| 3.25 |
| 3.25 |
| 4.87 |
| 2.70 |
| 7.57 |
| N32-21-PP-006 |
| East Mill |
| N37 |
| 18.00 |
| 19.00 |
| 1.00 |
| 1.00 |
| 0.91 |
| 0.82 |
| 1.73 |
Qualified Person
Mr. Robin Adair is the Qualified Person and the Vice President Exploration for Osisko Metals Incorporated. He is responsible for the technical data reported in this news release and he is a Professional Geologist registered in the Northwest Territories.
Quality Assurance / Quality Control
Osisko Metals adheres to a strict QA/QC program for core handling, sampling, sample transportation and analyses. Drill core samples from the Pine Point project area are securely transported to its core facility on site, where they were logged and sampled. Samples selected for assay are shipped to ALS Canada Ltd.’s preparation facility in Yellowknife. Pulps are analyzed at the ALS Canada Ltd. facility in North Vancouver, BC. All samples are analyzed by four acid digestion followed by both ICP-AES and ICP-MS for a multi-element suite with a 1% upper detection limit for base metals. Samples reporting over 1% for Zn and 1% for Pb are analyzed by assay grade, four acid digestion and ICPAES analysis with an upper detection limit of 30% and 20% respectively. Samples reporting Zn >30% and or Pb >20% are analyzed by traditional titration. Current drill program is following strict COVID19 protocols, enforced as of January 15 th , 2021.
Table 2: Drill Hole Collar Locations (NAD83 (CSRS) Zone 11)
| Hole Name |
| Zone |
| Deposit |
| Easting |
| Northing |
| Elev. (m) |
| Azm. |
| Dip |
| Length (m) |
| K60-21-PP-001 |
| Central - 1 |
| K60 |
| 630415.9 |
| 6745332.6 |
| 216.9 |
| 0.0 |
| -90 |
| 90.0 |
| K60-21-PP-002 |
| Central - 1 |
| K60 |
| 630437.0 |
| 6745342.5 |
| 216.9 |
| 0.0 |
| -90 |
| 81.0 |
| K60-21-PP-004 |
| Central - 1 |
| K60 |
| 630459.6 |
| 6745353.9 |
| 217.0 |
| 0.0 |
| -90 |
| 84.0 |
| K60-21-PP-005 |
| Central - 1 |
| K60 |
| 630480.3 |
| 6745334.8 |
| 216.9 |
| 0.0 |
| -90 |
| 87.0 |
| K60-21-PP-006 |
| Central - 1 |
| K60 |
| 630506.5 |
| 6745347.0 |
| 217.0 |
| 0.0 |
| -90 |
| 87.0 |
| K60-21-PP-007 |
| Central - 1 |
| K60 |
| 630486.6 |
| 6745355.4 |
| 216.9 |
| 0.0 |
| -90 |
| 87.0 |
| L27-21-PP-001 |
| East Mill |
| L27 |
| 644965.8 |
| 6752828.7 |
| 214.5 |
| 0.0 |
| -90 |
| 30.0 |
| L27-21-PP-002 |
| East Mill |
| L27 |
| 645028.3 |
| 6752898.3 |
| 214.7 |
| 0.0 |
| -90 |
| 33.0 |
| L35-21-PP-011 |
| East Mill |
| L35 |
| 642111.2 |
| 6751588.8 |
| 215.7 |
| 0.0 |
| -90 |
| 61.5 |
| L35-21-PP-012 |
| East Mill |
| L35 |
| 642231.1 |
| 6751629.0 |
| 214.9 |
| 0.0 |
| -90 |
| 60.0 |
| L35-21-PP-013 |
| East Mill |
| L35 |
| 642276.0 |
| 6751693.1 |
| 214.5 |
| 0.0 |
| -90 |
| 60.0 |
| L35-21-PP-014 |
| East Mill |
| L35 |
| 642287.7 |
| 6751585.6 |
| 215.8 |
| 0.0 |
| -90 |
| 60.0 |
| L35-21-PP-015 |
| East Mill |
| L35 |
| 642353.6 |
| 6751590.7 |
| 215.7 |
| 0.0 |
| -90 |
| 54.0 |
| L35-21-PP-016 |
| East Mill |
| L35 |
| 642369.5 |
| 6751617.1 |
| 215.2 |
| 0.0 |
| -90 |
| 57.0 |
| L35-21-PP-017 |
| East Mill |
| L35 |
| 642456.8 |
| 6751671.4 |
| 214.4 |
| 0.0 |
| -90 |
| 63.0 |
| L35-21-PP-018 |
| East Mill |
| L35 |
| 642466.8 |
| 6751645.7 |
| 214.7 |
| 0.0 |
| -90 |
| 57.0 |
| L35-21-PP-019 |
| East Mill |
| L35 |
| 642612.0 |
| 6751714.9 |
| 213.9 |
| 0.0 |
| -90 |
| 54.0 |
| L35-21-PP-020 |
| East Mill |
| L35 |
| 642774.0 |
| 6751874.8 |
| 214.1 |
| 0.0 |
| -90 |
| 54.0 |
| L35-21-PP-021 |
| East Mill |
| L35 |
| 642931.1 |
| 6751941.4 |
| 213.7 |
| 0.0 |
| -90 |
| 51.0 |
| L35-21-PP-022 |
| East Mill |
| L35 |
| 642991.6 |
| 6751898.3 |
| 214.2 |
| 0.0 |
| -90 |
| 45.0 |
| L35-21-PP-023 |
| East Mill |
| L35 |
| 643002.6 |
| 6751946.7 |
| 214.0 |
| 0.0 |
| -90 |
| 48.0 |
| L35-21-PP-025 |
| East Mill |
| L35 |
| 643102.4 |
| 6752002.5 |
| 213.8 |
| 0.0 |
| -90 |
| 42.0 |
| L35-21-PP-026 |
| East Mill |
| L35 |
| 643214.3 |
| 6752018.0 |
| 213.9 |
| 0.0 |
| -90 |
| 45.0 |
| L35-21-PP-028 |
| East Mill |
| L35 |
| 643508.9 |
| 6752099.6 |
| 214.5 |
| 0.0 |
| -90 |
| 39.0 |
| L35-21-PP-029 |
| East Mill |
| L35 |
| 643425.5 |
| 6752261.5 |
| 214.9 |
| 0.0 |
| -90 |
| 51.0 |
| L35-21-PP-030 |
| East Mill |
| L35 |
| 643533.4 |
| 6752352.2 |
| 215.8 |
| 0.0 |
| -90 |
| 45.0 |
| L35-21-PP-031 |
| East Mill |
| L35 |
| 643602.0 |
| 6752315.7 |
| 215.3 |
| 0.0 |
| -90 |
| 45.0 |
| L35-21-PP-032 |
| East Mill |
| L35 |
| 643734.7 |
| 6752397.2 |
| 215.1 |
| 0.0 |
| -90 |
| 48.0 |
| L35-21-PP-033 |
| East Mill |
| L35 |
| 643736.9 |
| 6752472.0 |
| 215.2 |
| 0.0 |
| -90 |
| 39.0 |
| M40-21-PP-001* |
| East Mill |
| M40 |
| 639614.3 |
| 6749591.8 |
| 222.8 |
| 0.0 |
| -90 |
| 57.0 |
| M6263-21-PP-003 |
| Central - 1 |
| M6263 |
| 629525.4 |
| 6744413.6 |
| 221.8 |
| 0.0 |
| -90 |
| 96.0 |
| M6263-21-PP-005 |
| Central - 1 |
| M6263 |
| 629560.9 |
| 6744444.4 |
| 220.9 |
| 0.0 |
| -90 |
| 90.0 |
| M6263-21-PP-006 |
| Central - 1 |
| M6263 |
| 629717.5 |
| 6744382.2 |
| 223.4 |
| 0.0 |
| -90 |
| 96.0 |
| M6263-21-PP-008* |
| Central - 1 |
| M6263 |
| 629822.1 |
| 6744397.1 |
| 220.1 |
| 0.0 |
| -90 |
| 96.0 |
| M6263-21-PP-017 |
| Central - 1 |
| M6263 |
| 629917.9 |
| 6744695.0 |
| 217.1 |
| 0.0 |
| -90 |
| 90.0 |
| M6263-21-PP-018 |
| Central - 1 |
| M6263 |
| 629946.0 |
| 6744709.8 |
| 217.1 |
| 0.0 |
| -90 |
| 87.0 |
| M6263-21-PP-019 |
| Central - 1 |
| M6263 |
| 630004.9 |
| 6744716.4 |
| 217.7 |
| 0.0 |
| -90 |
| 87.0 |
| M6263-21-PP-020 |
| Central - 1 |
| M6263 |
| 630092.7 |
| 6744562.3 |
| 225.6 |
| 0.0 |
| -90 |
| 84.0 |
| M6263-21-PP-021 |
| Central - 1 |
| M6263 |
| 630112.3 |
| 6744539.5 |
| 222.3 |
| 0.0 |
| -90 |
| 90.0 |
| M6263-21-PP-022 |
| Central - 1 |
| M6263 |
| 630136.8 |
| 6744555.5 |
| 222.6 |
| 0.0 |
| -90 |
| 81.0 |
| N32-21-PP-001 |
| East Mill |
| N32 |
| 643071.8 |
| 6751220.0 |
| 216.0 |
| 0.0 |
| -90 |
| 33.0 |
| N32-21-PP-002 |
| East Mill |
| N32 |
| 643097.1 |
| 6751253.3 |
| 214.8 |
| 0.0 |
| -90 |
| 33.0 |
| N32-21-PP-003 |
| East Mill |
| N32 |
| 643100.4 |
| 6751221.7 |
| 216.2 |
| 0.0 |
| -90 |
| 39.0 |
| N32-21-PP-004 |
| East Mill |
| N32 |
| 643128.6 |
| 6751212.5 |
| 217.0 |
| 0.0 |
| -90 |
| 36.0 |
| N32-21-PP-005 |
| East Mill |
| N32 |
| 643115.5 |
| 6751185.0 |
| 216.2 |
| 0.0 |
| -90 |
| 39.0 |
| N32-21-PP-006 |
| East Mill |
| N32 |
| 643180.2 |
| 6751132.1 |
| 213.3 |
| 0.0 |
| -90 |
| 36.0 |
| N39-21-PP-009 |
| East Mill |
| N39 |
| 640255.2 |
| 6749934.4 |
| 219.7 |
| 0.0 |
| -90 |
| 48.0 |
| N39-21-PP-011 |
| East Mill |
| N39 |
| 640278.2 |
| 6749912.0 |
| 219.7 |
| 0.0 |
| -90 |
| 45.0 |
| N39-21-PP-012 |
| East Mill |
| N39 |
| 640292.4 |
| 6749880.7 |
| 219.5 |
| 0.0 |
| -90 |
| 48.0 |
| N39-21-PP-014 |
| East Mill |
| N39 |
| 640320.9 |
| 6749945.7 |
| 219.6 |
| 0.0 |
| -90 |
| 45.0 |
| N39-21-PP-015 |
| East Mill |
| N39 |
| 640346.1 |
| 6749955.6 |
| 219.8 |
| 0.0 |
| -90 |
| 48.0 |
| N39-21-PP-018 |
| East Mill |
| N39 |
| 640685.6 |
| 6750082.6 |
| 219.2 |
| 0.0 |
| -90 |
| 42.0 |
| N39-21-PP-022 |
| East Mill |
| N39 |
| 640646.7 |
| 6750106.7 |
| 220.6 |
| 0.0 |
| -90 |
| 48.0 |
| N39-21-PP-029 |
| East Mill |
| N39 |
| 640324.8 |
| 6749821.2 |
| 219.6 |
| 0.0 |
| -90 |
| 42.0 |
| N39-21-PP-030 |
| East Mill |
| N39 |
| 640334.6 |
| 6749780.9 |
| 219.7 |
| 0.0 |
| -90 |
| 45.0 |
| N39-21-PP-031 |
| East Mill |
| N39 |
| 640269.0 |
| 6749769.0 |
| 220.1 |
| 0.0 |
| -90 |
| 45.0 |
| N39-21-PP-032 |
| East Mill |
| N39 |
| 640446.6 |
| 6749735.6 |
| 219.8 |
| 0.0 |
| -90 |
| 40.5 |
| N39-21-PP-033 |
| East Mill |
| N39 |
| 640424.2 |
| 6749769.8 |
| 219.9 |
| 0.0 |
| -90 |
| 42.0 |
| N39-21-PP-034 |
| East Mill |
| N39 |
| 640446.9 |
| 6749766.8 |
| 219.8 |
| 0.0 |
| -90 |
| 42.0 |
| N39-21-PP-035 |
| East Mill |
| N39 |
| 640451.5 |
| 6749799.8 |
| 219.9 |
| 0.0 |
| -90 |
| 42.0 |
| N39-21-PP-036 |
| East Mill |
| N39 |
| 640479.2 |
| 6749797.6 |
| 219.9 |
| 0.0 |
| -90 |
| 42.0 |
| N39-21-PP-037 |
| East Mill |
| N39 |
| 640468.4 |
| 6749890.8 |
| 219.4 |
| 0.0 |
| -90 |
| 45.0 |
| N39-21-PP-038 |
| East Mill |
| N39 |
| 640553.9 |
| 6750092.0 |
| 219.4 |
| 0.0 |
| -90 |
| 42.0 |
| N39-21-PP-039 |
| East Mill |
| N39 |
| 640536.0 |
| 6750064.0 |
| 219.3 |
| 0.0 |
| -90 |
| 45.0 |
| N39-21-PP-040 |
| East Mill |
| N39 |
| 640498.5 |
| 6750057.0 |
| 219.4 |
| 0.0 |
| -90 |
| 45.0 |
| N39-21-PP-041 |
| East Mill |
| N39 |
| 640493.6 |
| 6750083.0 |
| 219.4 |
| 0.0 |
| -90 |
| 45.0 |
| N39-21-PP-042 |
| East Mill |
| N39 |
| 640472.0 |
| 6750051.6 |
| 219.4 |
| 0.0 |
| -90 |
| 45.0 |
| N39-21-PP-043 |
| East Mill |
| N39 |
| 640843.5 |
| 6750146.3 |
| 213.7 |
| 0.0 |
| -90 |
| 34.5 |
| N39-21-PP-044 |
| East Mill |
| N39 |
| 640701.0 |
| 6750117.3 |
| 219.3 |
| 0.0 |
| -90 |
| 42.0 |
| N39-21-PP-045 |
| East Mill |
| N39 |
| 640680.8 |
| 6750124.0 |
| 219.4 |
| 0.0 |
| -90 |
| 42.0 |
(*hydrogeological hole)
About Osisko Metals
Osisko Metals Incorporated is a Canadian exploration and development company creating value in the base metal space. The Company controls one of Canada’s premier past-producing zinc mining camps, the Pine Point Project, located in the Northwest Territories for which the 2020 PEA has indicated an after-tax NPV of $500M and an IRR of 29.6%. The Pine Point Project PEA is based on current Mineral Resource Estimates that are amenable to open pit and shallow underground mining and consist of 12.9Mt grading 6.29% ZnEq of Indicated Mineral Resources and 37.6Mt grading 6.80% ZnEq of Inferred Mineral Resources. Please refer to the technical report entitled “Preliminary Economic Assessment, Pine Point Project, Hay River, Northwest Territories, Canada” dated July 30, which has been filed on SEDAR. The Pine Point Project is located on the south shore of Great Slave Lake in the Northwest Territories, near infrastructure, paved highway access, and has an electrical substation as well as 100 kilometres of viable haulage roads already in place.
The current Mineral Resources mentioned in this press release conform to NI43-101 standards and were prepared by independent qualified persons, as defined by NI43-101 guidelines. The abovementioned Mineral Resources are not Mineral Reserves as they do not have demonstrated economic viability. The quantity and grade of the reported Inferred Mineral Resources are conceptual in nature and are estimated based on limited geological evidence and sampling. Geological evidence is sufficient to imply but not verify geological grade and/or quality of continuity. Zinc equivalency percentages are calculated using metal prices, forecasted metal recoveries, concentrate grades, transport costs, smelter payable metals and charges (see respective technical reports for details).
For further information on this press release, visit www.osiskometals.com or contact:
Robert Wares, CEO Osisko Metals Incorporated
Email: info@osiskometals.com
www.osiskometals.com
Cautionary Statement on Forward-Looking Information
This news release contains "forward-looking information" within the meaning of applicable Canadian securities legislation based on expectations, estimates and projections as at the date of this news release. Any statement that involves predictions, expectations, interpretations, beliefs, plans, projections, objectives, assumptions, future events or performance are not statements of historical fact and constitute forward-looking information. This news release may contain forward-looking information pertaining to the Pine Point Project, including, among other things, the results of the PEA and the IRR, NPV and estimated costs, production, production rate and mine life; the expectation that the Pine Point Project will be an robust operation and profitable at a variety of prices and assumptions; the expected high quality of the Pine Point concentrates; the potential impact of the Pine Point Project in the Northwest Territories, including but not limited to the potential generation of tax revenue and contribution of jobs; and the Pine Point Project having the potential for mineral resource expansion and new discoveries. Forward-looking information is not a guarantee of future performance and is based upon a number of estimates and assumptions of management, in light of management’s experience and perception of trends, current conditions and expected developments, as well as other factors that management believes to be relevant and reasonable in the circumstances, including, without limitation, assumptions about: favourable equity and debt capital markets; the ability to raise additional capital on reasonable terms to advance the development of its projects and pursue planned exploration; future prices of zinc and lead; the timing and results of exploration and drilling programs; the accuracy of mineral resource estimates; production costs; operating conditions being favourable; political and regulatory stability; the receipt of governmental and third party approvals; licenses and permits being received on favourable terms; sustained labour stability; stability in financial and capital markets; availability of equipment; and positive relations with local groups. Forward-looking information involves risks, uncertainties and other factors that could cause actual events, results, performance, prospects and opportunities to differ materially from those expressed or implied by such forward-looking information. Factors that could cause actual results to differ materially from such forward-looking information are set out in the Company’s public documents filed at www.sedar.com . Although the Company believes that the assumptions and factors used in preparing the forward-looking information in this news release are reasonable, undue reliance should not be placed on such information, which only applies as of the date of this news release, and no assurance can be given that such events will occur in the disclosed time frames or at all. The Company disclaims any intention or obligation to update or revise any forward-looking information, whether as a result of new information, future events or otherwise, other than as required by law.
Neither the TSX Venture Exchange nor its Regulation Services Provider (as that term is defined in the policies of the TSXV) accepts responsibility for the adequacy or accuracy of this news release.