Twitter

Link your Twitter Account to Market Wire News


When you linking your Twitter Account Market Wire News Trending Stocks news and your Portfolio Stocks News will automatically tweet from your Twitter account.


Be alerted of any news about your stocks and see what other stocks are trending.



home / news releases / OSK:CC - Osisko Windfall Drilling Intercepts High-Grade in Multiple Lynx Zones


OSK:CC - Osisko Windfall Drilling Intercepts High-Grade in Multiple Lynx Zones

TORONTO, May 25, 2022 (GLOBE NEWSWIRE) -- Osisko Mining Inc. (OSK:TSX. "Osisko" or the "Corporation") is pleased to provide new analytical results from the ongoing drill program at its 100% owned Windfall gold project located in the Abitibi greenstone belt, Urban Township, Eeyou Istchee James Bay, Québec.

Significant new analytical results presented below include 71 intercepts in 27 underground drill holes and 13 wedges. The infill intercepts are located inside defined January 2022 mineral resource estimate (“MRE”) blocks ( see Osisko news release dated January 10, 2022 ). The expansion intercepts are located outside the January 2022 MRE blocks and either expand resource wireframes or are in a defined zone or corridor but do not yet correlate to a specific wireframe.

Osisko Chief Executive Officer John Burzynski commented: “Infill drilling in support of the upcoming feasibility study continues to intersect high-grade across the deposit, especially in the Lynx area. This week’s expansion intercepts, including the higher-up Bobcat holes, are 25 metre step-outs which allow for these intercepts to be included in the resource estimate.”

Selected high-grade intercepts include: 272 g/t Au over 2.3 metres in WST-22-1018-W1 , 26.3 g/t Au over 15.8 metres in OSK-W-22-2587-W3; 95.8 g/t Au over 3.1 metres in OSK-W-22-2601-W6; 131 g/t Au over 2.2 metres in OSK-W-22-2646-W5; 21.4 g/t Au over 13.2 metres in OSK-W-22-2605-W3; 39.9 g/t Au over 6.8 metres in OSK-W-22-2605-W2; 80.0 g/t Au over 3.2 metres in OSK-W-22-2646-W4, 125 g/t Au over 2.0 metres in WST-22-1019, 112 g/t Au over 2.2 metres in WST-22-1021 and 24.6 g/t Au over 9.6 metres in WST-22-1020. Maps showing hole locations and full analytical results are available at www.osiskomining.com . Maps: Long Section_All zones In EN 20220525 , Long Section_All zones Ex EN 20220525 , PR_EN_20220525_Surface , PR_EN_20220525_UG .

Infill Drilling

Hole No.
From
(m)
To
(m)
Interval
(m)
Au (g/t)
uncut
Au (g/t)
cut to
100 g/t
Zone
Corridor
OSK-W-22-2587-W3
1134.0
1149.8
15.8
26.3
11.3
TLX_3172

Triple Lynx

including
1148.3
1149.1
0.8
397
100
OSK-W-22-2587-W4
1125.0
1127.0
2.0
20.6
TLX_3162

Triple Lynx

including
1126.0
1126.7
0.7
43.1
1139.0
1143.0
4.0
10.1
TLX_3170

Triple Lynx

including
1139.0
1139.7
0.7
43.1
1151.1
1153.5
2.4
30.7
24.5
TLX_3172

Triple Lynx

including
1152.0
1152.4
0.4
138
100
OSK-W-22-2601-W4
1010.0
1012.1
2.1
121
35.8
TLX_3158

Triple Lynx

including
1010.0
1010.7
0.7
356
100
OSK-W-22-2601-W6
1022.3
1025.4
3.1
95.8
70.8
TLX_3158

Triple Lynx

including
1024.0
1024.6
0.6
186
100
OSK-W-22-2605-W2
1315.5
1322.3
6.8
39.9
23.9
LX4_3449



Lynx 4



including
1315.5
1316.0
0.5
186
100
and
1321.6
1322.0
0.4
266
100
OSK-W-22-2605-W3
1332.6
1345.8
13.2
21.4
17.1
LX4_3449



Lynx 4



including
1336.0
1336.5
0.5
212
100
and
1338.5
1339.4
0.9
58.1
OSK-W-22-2605-W4
1318.7
1322.1
3.4
11.2
LX4_3449

Lynx 4

including
1319.7
1320.0
0.3
32.9
1324.7
1328.0
3.3
3.79
LX4_3449
Lynx 4
1347.0
1364.5
17.5
4.66
LX4_3445
Lynx 4
OSK-W-22-2605-W5
1299.6
1303.1
3.5
35.0
30.3
LX4_3449

Lynx 4

including
1301.1
1301.8
0.7
124
100
1313.7
1316.1
2.4
4.99
LX4_3449

Lynx 4

including
1314.5
1315.2
0.7
10.8
OSK-W-22-2605-W6
1361.6
1364.3
2.7
4.27
LX4_3445
Lynx 4
OSK-W-22-2646-W4
1149.0
1151.3
2.3
10.0
TLX_3162

Triple Lynx

including
1149.4
1149.9
0.5
44.4
1186.4
1189.6
3.2
80.0
64.5
TLX_3172

Triple Lynx

including
1186.4
1187.0
0.6
175
100
OSK-W-22-2646-W5
1046.3
1048.3
2.0
41.0
21.3
TLX_3158

Triple Lynx

including
1046.6
1046.9
0.3
231
100
1050.1
1052.2
2.1
6.71
TLX_3158
Triple Lynx
WST-21-0713A
79.8
82.0
2.2
6.24
LXM_3371
Lynx
WST-21-0845
86.0
88.0
2.0
5.19
LXM_3336

Lynx

including
86.7
87.0
0.3
34.4
98.6
100.7
2.1
18.8
LXM_3371

Lynx

including
100.0
100.4
0.4
91.0
WST-21-0847
96.2
99.8
3.6
20.2
LXM_3371

Lynx

including
96.2
97.0
0.8
59.4
WST-21-0848
73.5
75.9
2.4
7.49
LXM_3336

Lynx

including
75.5
75.9
0.4
44.5
97.0
99.4
2.4
8.86
LXM_3371

Lynx

including
98.1
98.5
0.4
37.8
113.0
117.7
4.7
4.17
LXM_3359

Lynx

including
113.0
113.4
0.4
26.9
WST-21-0849
74.0
76.6
2.6
11.3
LXM_3336

Lynx

including
75.7
76.3
0.6
47.7
96.0
98.0
2.0
29.1
LXM_3371

Lynx

including
97.2
97.6
0.4
91.9
110.1
112.3
2.2
6.17
LXM_3359

Lynx

including
110.4
110.9
0.5
26.5
WST-21-0887
121.0
123.5
2.5
7.59
LXM_3359

Lynx

including
123.0
123.5
0.5
33.4
WST-21-0891
97.8
100.0
2.2
18.4
LXM_3371

Lynx

including
97.8
98.3
0.5
69.1
WST-21-0905
53.1
55.2
2.1
5.62
LXM_3339

Lynx

including
53.6
54.0
0.4
17.3
WST-21-0921
47.7
49.7
2.0
21.4
LXM_3303

Lynx

including
48.6
49.7
1.1
38.5
WST-21-0923
65.5
67.8
2.3
5.91
LXM_3336

Lynx

including
65.5
66.1
0.6
17.8
98.3
100.5
2.2
7.23
LXM_3371

Lynx

including
98.3
99.1
0.8
19.5
WST-21-0941
58.8
61.1
2.3
55.1
27.3
LXM_3336

Lynx

including
59.3
59.8
0.5
228
100
WST-22-0998
200.8
205.2
4.4
8.34
MAL_5215

Mallard

including
204.0
205.2
1.2
23.8
WST-22-1010
357.5
359.7
2.2
10.4
LX4_3405

Lynx 4

including
358.0
358.4
0.4
37.0
WST-22-1011
200.5
202.5
2.0
84.1
67.3
TLX_3161

Triple Lynx

including
201.3
202.5
1.2
128
100
WST-22-1014-W1
473.5
477.5
4.0
20.9
12.6
LX4_3404

Lynx 4

including
473.5
473.9
0.4
183
100
482.3
484.4
2.1
10.1
LX4_3430

Lynx 4

including
483.8
484.4
0.6
33.3
WST-22-1015
183.3
185.3
2.0
4.03
MAL_5215

Mallard

including
184.4
185.0
0.6
12.6
WST-22-1016
264.6
268.3
3.7
40.8
TLX_3158

Triple Lynx

including
265.3
265.8
0.5
88.6
WST-22-1018
198.8
200.9
2.1
62.4
30.0
TLX_3161

Triple Lynx

including
200.1
200.5
0.4
270
100
540.7
542.8
2.1
5.74
LX4_3404

Lynx 4

including
540.7
541.3
0.6
16.0
WST-22-1018-W1
540.0
542.0
2.0
6.31
LX4_3404
Lynx 4
545.4
547.7
2.3
272
58.9
LX4_3430



Lynx 4



including
545.4
546.0
0.6
504
100
and
547.1
547.7
0.6
512
100
WST-22-1019
227.8
230.4
2.6
9.93
TLX_3131

Triple Lynx

including
228.9
229.2
0.3
64.2
395.0
397.0
2.0
38.2
15.5
LX4_3410

Lynx 4

including
396.1
396.4
0.3
251
100
425.3
428.0
2.7
16.6
11.8
LX4_3409

Lynx 4

including
425.3
425.6
0.3
143
100
430.0
432.0
2.0
125
15.3
LX4_3409

Lynx 4

including
431.7
432.0
0.3
833
100
WST-22-1020
139.0
141.4
2.4
9.86
LXM_3334

Lynx

including
139.3
139.7
0.4
23.7
312.0
321.6
9.6
24.6
13.0
TLX_3131

Triple Lynx

including
318.4
319.4
1.0
211
100
539.8
542.0
2.2
5.75
LX4_3450

Lynx 4

including
540.3
540.6
0.3
39.3
WST-22-1021
281.0
285.0
4.0
46.6
40.4
TLX_3158

Triple Lynx

including
282.3
282.9
0.6
142
100
323.7
327.8
4.1
10.2
TLX_3155

Triple Lynx

including
327.4
327.8
0.4
98.9
WST-22-1025
160.3
163.0
2.7
14.0
LXM_3388
Lynx
WST-22-1036
497.9
500.3
2.4
4.87
LX4_3404

Lynx 4

including
497.9
498.3
0.4
22.9
513.0
515.0
2.0
11.8
LX4_3404

Lynx 4

including
514.0
514.4
0.4
41.5
WST-22-1051
257.0
260.0
3.0
20.6
TLX_3158
Triple Lynx
WST-22-1055
86.8
89.0
2.2
7.35
TLX_3161

Triple Lynx

including
86.8
87.1
0.3
46.0

Notes: True widths are estimated at 55 – 80% of the reported core length interval. See "Quality Control and Reporting Protocols" below., LXM = Lynx Main, LX4 = Lynx 4, TLX = Triple Lynx and MAL = Mallard.

Expansion Drilling

Hole No.
From
(m)
To
(m)
Interval
(m)
Au (g/t)
uncut
Au (g/t)
cut to
100 g/t
Zone
Corridor
OSK-W-22-2587-W4
1109.7
1118.6
8.9
3.65
TLX

Triple Lynx

including
1118.2
1118.6
0.4
25.0
OSK-W-22-2646-W4
1115.0
1120.6
5.6
4.00
TLX

Triple Lynx

including
1120.0
1120.6
0.6
18.1
1125.0
1127.0
2.0
3.90
TLX
Triple Lynx
OSK-W-22-2646-W5
1169.3
1171.5
2.2
131
31.6
TLX_3172

Triple Lynx

including
1169.7
1170.3
0.6
465
100
WST-21-0771C
104.2
107.0
2.8
11.4
BCT

Bobcat

including
105.0
106.0
1.0
23.7
WST-21-0872
74.7
76.8
2.1
8.46
LXM

Lynx

including
75.7
76.3
0.6
20.0
WST-21-0899B
35.4
37.5
2.1
11.9
BCT

Bobcat

including
35.8
36.1
0.3
80.3
WST-22-1014-W1
558.0
560.2
2.2
4.02
LX4
Lynx 4
WST-22-1019
351.3
354.0
2.7
5.09
LX4_3401
Lynx 4
WST-22-1020
295.7
300.0
4.3
7.57
TLX

Triple Lynx

including
295.7
296.2
0.5
16.4
WST-22-1021
437.4
439.6
2.2
112
83.4
TLX_3172

Triple Lynx

including
438.6
439.6
1.0
164
100

Notes: True widths are estimated at 55 – 80% of the reported core length interval. See "Quality Control and Reporting Protocols" below., BCT = Bobcat, LXM = Lynx Main, LX4 = Lynx 4 and TLX = Triple Lynx.

Drill hole location

Hole No.
Azimuth
(°)
Dip
(°)
Length
(m)
UTM E
UTM N
Elevation
Section
OSK-W-22-2587-W3
127
-59
1221
453350
5435673
413
3850
OSK-W-22-2587-W4
127
-59
1218
453350
5435673
413
3850
OSK-W-22-2601-W4
125
-61
1098
453425
5435656
412
3900
OSK-W-22-2601-W6
125
-61
1212
453425
5435656
412
3900
OSK-W-22-2605-W2
112
-55
1431
453551
5435669
408
4025
OSK-W-22-2605-W3
112
-55
1455
453551
5435669
408
4025
OSK-W-22-2605-W4
112
-55
1425
453551
5435669
408
4025
OSK-W-22-2605-W5
112
-55
1401
453551
5435669
408
4025
OSK-W-22-2605-W6
112
-55
1404
453551
5435669
408
4025
OSK-W-22-2646-W4
109
-58
1254
453326
5435648
414
3800
OSK-W-22-2646-W5
109
-58
1245
453326
5435648
414
3800
WST-21-0713A
158
4
94
453359
5435194
84
3625
WST-21-0771C
127
-52
357
452954
5435003
252
3175
WST-21-0845
130
-29
111
453315
5435165
124
3550
WST-21-0847
134
-30
114
453315
5435165
124
3550
WST-21-0848
135
-27
129
453315
5435165
124
3550
WST-21-0849
134
-24
118
453315
5435164
124
3550
WST-21-0872
135
-69
348
453508
5435327
-7
3800
WST-21-0887
136
-33
132
453315
5435165
123
3550
WST-21-0891
138
-28
126
453314
5435164
124
3550
WST-21-0899B
134
-60
287
452955
5435004
253
3175
WST-21-0905
141
-52
64
453221
5435121
135
3450
WST-21-0921
148
-37
114
453314
5435164
124
3550
WST-21-0923
147
-31
111
453314
5435164
124
3550
WST-21-0941
153
-23
129
453315
5435164
124
3550
WST-22-0998
358
-52
230
452207
5434903
247
2475
WST-22-1010
136
-28
481
453445
5435276
-99
3725
WST-22-1011
134
-32
630
453344
5435312
-66
3650
WST-22-1014-W1
123
-37
594
453507
5435332
-47
3800
WST-22-1015
345
-60
210
452206
5434903
247
2475
WST-22-1016
143
-65
448
453647
5435347
-189
3950
WST-22-1018
115
-43
636
453506
5435327
-90
3800
WST-22-1018-W1
115
-43
585
453506
5435327
-90
3800
WST-22-1019
140
-27
463
453444
5435276
-99
3725
WST-22-1020
142
-52
582
453322
5435236
54
3600
WST-22-1021
149
-67
468
453647
5435347
-189
3950
WST-22-1025
122
-20
189
453507
5435332
-47
3800
WST-22-1036
130
-48
627
453505
5435326
-90
3800
WST-22-1051
106
-52
327
453702
5435377
-198
4000
WST-22-1055
144
-44
120
453600
5435324
-181
3950

Bobcat
Mineralization most commonly occurs in gold-bearing quartz-pyrite veins controlled by northeast trending faults and shears and to a lesser extent in minor crustiform quartz-tourmaline-ankerite-pyrite veins and pyrite replacement zones and stockwork. Mineralization is hosted in sheared mafic volcanics, rhyolites near faults, or at the contact with felsic porphyritic intrusions.

Lynx Zone
Mineralization occurs as grey to translucent quartz-carbonate-pyrite-tourmaline veins and pyrite replacement zones and stockworks. Vein-type mineralization is associated with haloes of pervasive sericite-pyrite ± silica alteration and contain sulphides (predominantly pyrite with minor amounts of chalcopyrite, sphalerite, galena, arsenopyrite, and pyrrhotite) and local visible gold. Replacement mineralization is associated with strong pervasive silica-sericite-ankerite ± tourmaline alteration and contains disseminated pyrite from trace to 80% with local visible gold. Pyrite stockworks can form envelopes that reach several tens of metres thick. Fuchsite alteration is common and is spatially constrained to near the gabbros. Mineralization occurs at or near geological contacts between felsic porphyritic or fragmental intrusions and the host rhyolites or gabbros and locally can be hosted along the gabbro-rhyolite contact.

Mallard
Mineralization is hosted in sheared mafic volcanics with felsic porphyritic intrusions and occurs as veins associated with sericite-pyrite ± silica ± chlorite alteration and contains pyrite ranging from trace to 30% and local visible gold.

Qualified Person
The scientific and technical content of this news release has been reviewed, prepared and approved by Mr. Louis Grenier, M.Sc.A., P.Geo. (OGQ 800), Director of Exploration for Osisko's Windfall gold project, who is a "qualified person" as defined by National Instrument 43-101 – Standards of Disclosure for Mineral Projects ("NI 43-101").

Quality Control and Reporting Protocols
True width determination is estimated at 55-80% of the reported core length interval for the zone. Assays are uncut except where indicated. Intercepts occur within geological confines of major zones but have not been correlated to individual vein domains at this time. Reported intervals include minimum weighted averages of 3.5 g/t Au diluted over core lengths of at least 2.0 metres. NQ core assays were obtained by either 1-kilogram screen fire assay or standard 50-gram fire-assaying-AA finish or gravimetric finish at (i) ALS Laboratories in Val d'Or, Québec, Vancouver, British Colombia, Lima, Peru or Vientiane, Laos (ii) Bureau Veritas in Timmins, Ontario. The 1-kilogram screen assay method is selected by the geologist when samples contain coarse gold or present a higher percentage of pyrite than surrounding intervals. Selected samples are also analyzed for multi-elements, including silver, using a Four Acid Digestion-ICP-MS method at ALS Laboratories. Drill program design, Quality Assurance/Quality Control ("QA/QC") and interpretation of results is performed by qualified persons employing a QA/QC program consistent with NI 43-101 and industry best practices. Standards and blanks are included with every 20 samples for QA/QC purposes by the Corporation as well as the lab. Approximately 5% of sample pulps are sent to secondary laboratories for check assay.

About the Windfall Gold Deposit
The Windfall gold deposit is located between Val-d'Or and Chibougamau in the Abitibi region of Québec, Canada. The Mineral Resource Estimate ( MRE ) defined by Osisko, as disclosed in the news release dated January 10, 2022 is supported by the technical report entitled “Mineral Resource Estimate Update for the Windfall Project” dated February 10, 2022 (with an effective date of October 21, 2021), and assuming a cut-off grade of 3.50 g/t Au, comprises 565,000 tonnes at 11.6 g/t Au (210,000 ounces) in the measured mineral resource category, 8,907,000 tonnes at 10.5 g/t Au (2,994,000 ounces) in the indicated mineral resource category and 13,035,000 tonnes at 8.6 g/t Au (3,585,000 ounces) in the inferred mineral resource category . The key assumptions, parameters and methods used to estimate the mineral resource estimate disclosed in the January 10, 2022, news release, certain of which are described in the January 10, 2022, news release, are further described in the full technical report for this updated mineral resource estimate in accordance with NI 43-101 and is available on SEDAR (www.sedar.com) under the Corporation's issuer profile. The Windfall gold deposit is currently one of the highest-grade resource-stage gold projects in Canada and has world-class scale. Mineralization occurs in three principal zones: Lynx, Main Zone, and Underdog. Mineralization is generally comprised of sub-vertical zones following intrusive porphyry contacts plunging to the northeast. The r esources are defined from surface to a depth of 1,600 metres as it now includes the Triple 8 (T8) zone. The resources excluding T8 are defined from surface to a depth of 1,200 metres. T he deposit remains open along strike and at depth . Mineralization has been identified at surface in some areas and as deep as 2,625 metres in others with significant potential to extend mineralization down-plunge and at depth.

About Osisko Mining Inc.
Osisko is a mineral exploration company focused on the acquisition, exploration, and development of gold resource properties in Canada. Osisko holds a 100% interest in the high-grade Windfall gold deposit located between Val-d'Or and Chibougamau in Québec and holds a 100% undivided interest in a large area of claims in the surrounding Urban Barry area and nearby Quévillon area (over 2,500 square kilometres).

Cautionary Note Regarding Forward-Looking Information
This news release contains "forward-looking information" within the meaning of the applicable Canadian securities legislation that is based on expectations, estimates, projections and interpretations as at the date of this news release. Any statement that involves predictions, expectations, interpretations, beliefs, plans, projections, objectives, assumptions, future events or performance (often, but not always, using phrases such as "expects", or "does not expect", "is expected", "interpreted", "management's view", "anticipates" or "does not anticipate", "plans", "budget", "scheduled", "forecasts", "estimates", "potential", "feasibility", "believes" or "intends" or variations of such words and phrases or stating that certain actions, events or results "may" or "could", "would", "might" or "will" be taken to occur or be achieved) are not statements of historical fact and may be forward-looking information and are intended to identify forward-looking information. This news release contains the forward-looking information pertaining to, among other things: the Windfall gold deposit being one of the highest-grade resource-stage gold projects in Canada and having world-class scale; the key assumptions, parameters and methods used to estimate the mineral resource estimate disclosed in this news release; the prospects, if any, of the Windfall gold deposit; timing and ability of Osisko to file a technical report for the mineral resource estimate disclosed in this news release; the timing and ability of Osisko, if at all, to publish a feasibility study for the Windfall gold deposit; the amount and type of drilling to be completed and the timing to complete such drilling; the focus of the remaining infill drilling; the trend of grade increase; the Lynx zone remaining open to expansion down plunge; upgrading a inferred mineral resource to a measured mineral resource or indicated mineral resource category; future drilling at the Windfall gold deposit; the significance of historic exploration activities and results. Such factors include, among others, risks relating to the ability of exploration activities (including drill results) to accurately predict mineralization; errors in management's geological modelling; the ability of Osisko to complete further exploration activities, including (infill) drilling; property and royalty interests in the Windfall gold deposit; the ability of the Corporation to obtain required approvals; the results of exploration activities; risks relating to mining activities; the global economic climate; metal prices; dilution; environmental risks; and community and non-governmental actions. Although the forward-looking information contained in this news release is based upon what management believes, or believed at the time, to be reasonable assumptions, Osisko cannot assure shareholders and prospective purchasers of securities of the Corporation that actual results will be consistent with such forward-looking information, as there may be other factors that cause results not to be as anticipated, estimated or intended, and neither Osisko nor any other person assumes responsibility for the accuracy and completeness of any such forward-looking information. Osisko does not undertake, and assumes no obligation, to update or revise any such forward-looking statements or forward-looking information contained herein to reflect new events or circumstances, except as may be required by law.

CONTACT INFORMATION:
John Burzynski
Chief Executive Officer
Telephone (416) 363-8653


Stock Information

Company Name: Osisko Mining Inc.
Stock Symbol: OSK:CC
Market: TSXC
Website: osiskomining.com

Menu

OSK:CC OSK:CC Quote OSK:CC Short OSK:CC News OSK:CC Articles OSK:CC Message Board
Get OSK:CC Alerts

News, Short Squeeze, Breakout and More Instantly...