Twitter

Link your Twitter Account to Market Wire News


When you linking your Twitter Account Market Wire News Trending Stocks news and your Portfolio Stocks News will automatically tweet from your Twitter account.


Be alerted of any news about your stocks and see what other stocks are trending.



home / news releases / OSK:CC - Osisko Windfall Infill Drilling Adds Wide High-Grade


OSK:CC - Osisko Windfall Infill Drilling Adds Wide High-Grade

TORONTO, June 07, 2022 (GLOBE NEWSWIRE) -- Osisko Mining Inc. (OSK:TSX. "Osisko" or the "Corporation") is pleased to provide new analytical results from the ongoing drill program at its 100% owned Windfall gold project located in the Abitibi greenstone belt, Urban Township, Eeyou Istchee James Bay, Québec.

Significant new analytical results presented below include 43 intercepts in 15 underground drill holes and 12 wedges. The infill intercepts are located inside defined January 2022 mineral resource estimate (“MRE”) blocks ( see Osisko news release dated January 10, 2022 ). The expansion intercepts are located outside the January 2022 MRE blocks and either expand resource wireframes or are in a defined zone or corridor but do not yet correlate to a specific wireframe.

Osisko Chief Executive Officer John Burzynski commented: “Lynx continues to return wide high-grade intercepts which will be included in the upcoming feasibility study. Our headline hole, with an estimated true thickness of eight meters, and other holes with sub-intervals over a kilogram of gold per tonne, demonstrate the robust nature of the high-grade areas in the Lynx 4 and Triple Lynx zones.”

Selected high-grade intercepts include: 293 g/t Au over 11.0 metres in OSK-W-22-2605-W6 , 199 g/t Au over 2.9 metres in OSK-W-22-2587-W6; 24.3 g/t Au over 13.4 metres in OSK-W-22-2587-W5; 73.4 g/t Au over 2.3 metres in WST-22-1041B and 54.9 g/t Au over 3.0 metres in WST-22-1046B. Maps showing hole locations and full analytical results are available at www.osiskomining.com .

Maps: Long Section_All zones In EN 20220607 , Long Section_All zones Ex EN 20220607 , PR_EN_20220607_Surface , PR_EN_20220607_UG .

Infill Drilling

Hole No.
From
(m)
To
(m)
Interval
(m)
Au (g/t)
uncut
Au (g/t)
cut to
100 g/t
Zone
Corridor
OSK-W-22-2587-W4
1084.4
1093.7
9.3
5.67
TLX_3155
Triple Lynx
including
1088.5
1088.9
0.4
26.9
OSK-W-22-2587-W5
1040.5
1043.0
2.5
8.52
TLX_3158
Triple Lynx
including
1040.5
1040.9
0.4
41.0
1052.4
1055.0
2.6
4.30
TLX_3158
Triple Lynx
including
1052.4
1052.8
0.4
18.9
1110.0
1112.1
2.1
8.85
TLX_3162
Triple Lynx
including
1110.7
1111.1
0.4
32.9
1120.7
1125.4
4.7
4.54
TLX_3162
Triple Lynx
including
1125.0
1125.4
0.4
23.6
1129.0
1131.0
2.0
8.25
TLX_3162
Triple Lynx
1136.3
1149.7
13.4
24.3
14.6
TLX_3172
Triple Lynx
including
1141.3
1142.3
1.0
129
100
and
1142.3
1142.8
0.5
302
100
OSK-W-22-2587-W6
1122.0
1126.0
4.0
15.3
15.0
TLX_3162
Triple Lynx
including
1122.0
1122.4
0.4
104
100
1134.6
1141.2
6.6
10.3
TLX_3162
Triple Lynx
including
1134.6
1135.2
0.6
33.8
1149.1
1152.0
2.9
199
31.0
TLX_3172
Triple Lynx
including
1149.1
1149.6
0.5
423
100
and
1150.1
1150.4
0.3
1185
100
OSK-W-22-2601-W5
1011.0
1013.6
2.6
37.5
TLX_3158
Triple Lynx
including
1011.7
1012.1
0.4
95.5
OSK-W-22-2605-W4
1301.2
1303.4
2.2
5.95
LX4_3449
Lynx 4
including
1302.5
1302.8
0.3
31.0
OSK-W-22-2605-W6
1316.4
1327.4
11.0
293
32.3
LX4_3449
Lynx 4
including
1317.4
1320.7
3.3
961
92.3
with
1318.8
1319.1
0.3
3040
100
with
1319.9
1320.2
0.3
5400
100
OSK-W-22-2646-W7
1066.0
1070.1
4.1
5.06
TLX_3158
Triple Lynx
including
1069.8
1070.1
0.3
30.6
WST-21-0929A
191.0
193.2
2.2
20.0
TLX_3161
Triple Lynx
including
192.4
192.9
0.5
78.5
WST-22-1014-W1
257.0
259.0
2.0
40.7
LXM_3367
Lynx
including
257.0
258.0
1.0
81.2
WST-22-1017
455.8
459.5
3.7
6.76
LX4_3401
Lynx 4
including
456.1
456.5
0.4
19.2
WST-22-1022
403.0
405.0
2.0
4.59
TLX_3162
Triple Lynx
WST-22-1023
204.0
206.1
2.1
27.2
TLX_3121
Triple Lynx
including
205.2
206.1
0.9
61.1
566.0
571.1
5.1
10.2
LX4_3404
Lynx 4
including
567.0
567.3
0.3
54.9
WST-22-1031A
449.0
451.0
2.0
7.47
LX4_3401
Lynx 4
including
450.2
450.7
0.5
19.4
499.6
503.1
3.5
4.52
LX4_3457
Lynx 4
including
499.6
500.1
0.5
13.0
and
502.7
503.1
0.4
17.5
WST-22-1041B
526.8
529.1
2.3
73.4
61.1
LX4_3430
Lynx 4
including
528.4
528.7
0.3
143
100
WST-22-1043
330.7
332.7
2.0
6.19
TLX_3131
Triple Lynx
including
330.7
331.0
0.3
20.6
WST-22-1045
291.5
293.7
2.2
29.8
TLX_3158
Triple Lynx
including
291.5
291.8
0.3
56.5
WST-22-1046B
315.0
318.0
3.0
54.9
41.8
TLX_3158
Triple Lynx
including
315.0
315.6
0.6
157
100
WST-22-1047
138.0
140.1
2.1
5.46
LXM_3345
Lynx
WST-22-1048
111.3
113.6
2.3
32.2
LXM_3314
Lynx
including
112.7
113.2
0.5
95.2
WST-22-1054
66.0
68.3
2.3
12.8
LXM_3388
Lynx
including
67.4
67.9
0.5
34.3
WST-22-1058C
339.3
344.7
5.4
10.6
TLX_3158
Triple Lynx
including
339.3
339.9
0.6
41.2
WST-22-1060
99.6
102.1
2.5
19.4
TLX_3121
Triple Lynx
including
100.9
101.2
0.3
66.9
WST-22-1062
153.6
156.0
2.4
35.6
TLX_3121
Triple Lynx
including
155.0
156.0
1.0
66.8

Notes: True widths are estimated at 55 – 80% of the reported core length interval. See "Quality Control and Reporting Protocols" below., LXM = Lynx Main, LX4 = Lynx 4 and TLX = Triple Lynx.

Expansion Drilling

Hole No.
From
(m)
To
(m)
Interval
(m)
Au (g/t)
uncut
Au (g/t)
cut to
100 g/t
Zone
Corridor
OSK-W-22-2587-W3
1101.8
1104.7
2.9
17.8
TLX
Triple Lynx
OSK-W-22-2587-W5
1094.3
1096.7
2.4
8.91
TLX
Triple Lynx
including
1096.3
1096.7
0.4
36.9
OSK-W-22-2587-W6
1104.0
1106.0
2.0
9.11
TLX
Triple Lynx
including
1104.3
1104.7
0.4
38.5
OSK-W-22-2601-W6
1096.2
1099.1
2.9
3.97
TLX_3162
Triple Lynx
including
1096.5
1096.9
0.4
13.9
OSK-W-22-2605-W4
1377.1
1379.1
2.0
6.74
LX4
Lynx 4
including
1378.0
1378.7
0.7
14.2
OSK-W-22-2646-W6
1069.7
1072.4
2.7
30.6
TLX_3158
Triple Lynx
including
1070.1
1070.5
0.4
72.0
and
1071.0
1071.4
0.4
75.8
1190.1
1194.2
4.1
16.1
TLX_3172
Triple Lynx
including
1190.1
1190.8
0.7
58.1
OSK-W-22-2646-W7
1110.4
1112.5
2.1
8.53
TLX
Triple Lynx
including
1111.7
1112.0
0.3
57.1
OSK-W-22-2646-W8
1165.0
1167.3
2.3
7.79
TLX_3162
Triple Lynx
including
1166.0
1166.3
0.3
38.8
1220.2
1222.3
2.1
9.82
TLX_3172
Triple Lynx
including
1220.2
1221.0
0.8
23.2
WST-22-1017
467.0
469.0
2.0
7.03
LX4
Lynx 4
including
468.0
469.0
1.0
12.4

Notes: True widths are estimated at 55 – 80% of the reported core length interval. See "Quality Control and Reporting Protocols" below., LX4 = Lynx 4 and TLX = Triple Lynx.

Drill hole location

Hole No.
Azimuth
(°)
Dip
(°)
Length
(m)
UTM E
UTM N
Elevation
Section
OSK-W-22-2587-W3
127
-59
1221
453350
5435673
413
3850
OSK-W-22-2587-W4
127
-59
1218
453350
5435673
413
3850
OSK-W-22-2587-W5
127
-59
1227
453350
5435673
413
3850
OSK-W-22-2587-W6
127
-59
1203
453350
5435673
413
3850
OSK-W-22-2601-W5
125
-61
1215
453425
5435656
412
3900
OSK-W-22-2601-W6
125
-61
1212
453425
5435656
412
3900
OSK-W-22-2605-W4
112
-55
1425
453551
5435669
408
4025
OSK-W-22-2605-W6
112
-55
1404
453551
5435669
408
4025
OSK-W-22-2646-W6
109
-58
1263
453326
5435648
414
3800
OSK-W-22-2646-W7
109
-58
1227
453326
5435648
414
3800
OSK-W-22-2646-W8
109
-58
1254
453326
5435648
414
3800
WST-21-0929A
117
-45
379
453506
5435326
-90
3800
WST-22-1014-W1
123
-37
594
453507
5435332
-47
3800
WST-22-1017
138
-26
561
453344
5435312
-66
3650
WST-22-1022
132
-62
479
453510
5435330
-127
3800
WST-22-1023
120
-48
646
453506
5435326
-90
3800
WST-22-1031A
136
-28
577
453344
5435312
-66
3650
WST-22-1041B
127
-43
585
453507
5435331
-48
3800
WST-22-1043
133
-26
561
453344
5435312
-66
3650
WST-22-1045
104
-54
339
453702
5435376
-198
4000
WST-22-1046B
125
-58
436
453510
5435331
-127
3800
WST-22-1047
130
-12
226
453647
5435347
-187
3950
WST-22-1048
139
-1
169
453647
5435347
-187
3950
WST-22-1054
120
-29
196
453647
5435347
-188
3950
WST-22-1058C
121
-60
520
453511
5435331
-127
3825
WST-22-1060
140
-55
156
453601
5435325
-181
3900
WST-22-1062
144
-59
171
453601
5435325
-181
3900

Lynx Zone
Mineralization occurs as grey to translucent quartz-carbonate-pyrite-tourmaline veins and pyrite replacement zones and stockworks. Vein-type mineralization is associated with haloes of pervasive sericite-pyrite ± silica alteration and contain sulphides (predominantly pyrite with minor amounts of chalcopyrite, sphalerite, galena, arsenopyrite, and pyrrhotite) and local visible gold. Replacement mineralization is associated with strong pervasive silica-sericite-ankerite ± tourmaline alteration and contains disseminated pyrite from trace to 80% with local visible gold. Pyrite stockworks can form envelopes that reach several tens of metres thick. Fuchsite alteration is common and is spatially constrained to near the gabbros. Mineralization occurs at or near geological contacts between felsic porphyritic or fragmental intrusions and the host rhyolites or gabbros and locally can be hosted along the gabbro-rhyolite contact.

Qualified Person
The scientific and technical content of this news release has been reviewed, prepared and approved by Mr. Louis Grenier, M.Sc.A., P.Geo. (OGQ 800), Director of Exploration for Osisko's Windfall gold project, who is a "qualified person" as defined by National Instrument 43-101 – Standards of Disclosure for Mineral Projects ("NI 43-101").

Quality Control and Reporting Protocols
True width determination is estimated at 55-80% of the reported core length interval for the zone. Assays are uncut except where indicated. Intercepts occur within geological confines of major zones but have not been correlated to individual vein domains at this time. Reported intervals include minimum weighted averages of 3.5 g/t Au diluted over core lengths of at least 2.0 metres. NQ core assays were obtained by either 1-kilogram screen fire assay or standard 50-gram fire-assaying-AA finish or gravimetric finish at (i) ALS Laboratories in Val d'Or, Québec, Vancouver, British Colombia, Lima, Peru or Vientiane, Laos (ii) Bureau Veritas in Timmins, Ontario. The 1-kilogram screen assay method is selected by the geologist when samples contain coarse gold or present a higher percentage of pyrite than surrounding intervals. Selected samples are also analyzed for multi-elements, including silver, using a Four Acid Digestion-ICP-MS method at ALS Laboratories. Drill program design, Quality Assurance/Quality Control ("QA/QC") and interpretation of results is performed by qualified persons employing a QA/QC program consistent with NI 43-101 and industry best practices. Standards and blanks are included with every 20 samples for QA/QC purposes by the Corporation as well as the lab. Approximately 5% of sample pulps are sent to secondary laboratories for check assay.

About the Windfall Gold Deposit
The Windfall gold deposit is located between Val-d'Or and Chibougamau in the Abitibi region of Québec, Canada. The Mineral Resource Estimate ( MRE ) defined by Osisko, as disclosed in the news release dated January 10, 2022 is supported by the technical report entitled “Mineral Resource Estimate Update for the Windfall Project” dated February 10, 2022 (with an effective date  of October 21, 2021), and assuming a cut-off grade of 3.50 g/t Au, comprises 565,000 tonnes at 11.6 g/t Au (210,000 ounces) in the measured mineral resource category, 8,907,000 tonnes at 10.5 g/t Au (2,994,000 ounces) in the indicated mineral resource category and 13,035,000 tonnes at 8.6 g/t Au (3,585,000 ounces) in the inferred mineral resource category . The key assumptions, parameters and methods used to estimate the mineral resource estimate disclosed in the January 10, 2022, news release, certain of which are described in the January 10, 2022, news release, are further described in the full technical report for this updated mineral resource estimate in accordance with NI 43-101 and is available on SEDAR (www.sedar.com) under the Corporation's issuer profile. The Windfall gold deposit is currently one of the highest-grade resource-stage gold projects in Canada and has world-class scale. Mineralization occurs in three principal zones: Lynx, Main Zone, and Underdog. Mineralization is generally comprised of sub-vertical zones following intrusive porphyry contacts plunging to the northeast. The r esources are defined from surface to a depth of 1,600 metres as it now includes the Triple 8 (T8) zone. The resources excluding T8 are defined from surface to a depth of 1,200 metres. T he deposit remains open along strike and at depth . Mineralization has been identified at surface in some areas and as deep as 2,625 metres in others with significant potential to extend mineralization down-plunge and at depth.

About Osisko Mining Inc.
Osisko is a mineral exploration company focused on the acquisition, exploration, and development of gold resource properties in Canada. Osisko holds a 100% interest in the high-grade Windfall gold deposit located between Val-d'Or and Chibougamau in Québec and holds a 100% undivided interest in a large area of claims in the surrounding Urban Barry area and nearby Quévillon area (over 2,500 square kilometres).

Cautionary Note Regarding Forward-Looking Information
This news release contains "forward-looking information" within the meaning of the applicable Canadian securities legislation that is based on expectations, estimates, projections and interpretations as at the date of this news release. Any statement that involves predictions, expectations, interpretations, beliefs, plans, projections, objectives, assumptions, future events or performance (often, but not always, using phrases such as "expects", or "does not expect", "is expected", "interpreted", "management's view", "anticipates" or "does not anticipate", "plans", "budget", "scheduled", "forecasts", "estimates", "potential", "feasibility", "believes" or "intends" or variations of such words and phrases or stating that certain actions, events or results "may" or "could", "would", "might" or "will" be taken to occur or be achieved) are not statements of historical fact and may be forward-looking information and are intended to identify forward-looking information. This news release contains the forward-looking information pertaining to, among other things: the Windfall gold deposit being one of the highest-grade resource-stage gold projects in Canada and having world-class scale; the key assumptions, parameters and methods used to estimate the mineral resource estimate disclosed in this news release; the prospects, if any, of the Windfall gold deposit; timing and ability of Osisko to file a technical report for the mineral resource estimate disclosed in this news release; the timing and ability of Osisko, if at all, to publish a feasibility study for the Windfall gold deposit; the amount and type of drilling to be completed and the timing to complete such drilling; the focus of the remaining infill drilling; the trend of grade increase; the Lynx zone remaining open to expansion down plunge; upgrading a inferred mineral resource to a measured mineral resource or indicated mineral resource category; future drilling at the Windfall gold deposit; the significance of historic exploration activities and results. Such factors include, among others, risks relating to the ability of exploration activities (including drill results) to accurately predict mineralization; errors in management's geological modelling; the ability of Osisko to complete further exploration activities, including (infill) drilling; property and royalty interests in the Windfall gold deposit; the ability of the Corporation to obtain required approvals; the results of exploration activities; risks relating to mining activities; the global economic climate; metal prices; dilution; environmental risks; and community and non-governmental actions. Although the forward-looking information contained in this news release is based upon what management believes, or believed at the time, to be reasonable assumptions, Osisko cannot assure shareholders and prospective purchasers of securities of the Corporation that actual results will be consistent with such forward-looking information, as there may be other factors that cause results not to be as anticipated, estimated or intended, and neither Osisko nor any other person assumes responsibility for the accuracy and completeness of any such forward-looking information. Osisko does not undertake, and assumes no obligation, to update or revise any such forward-looking statements or forward-looking information contained herein to reflect new events or circumstances, except as may be required by law.

CONTACT INFORMATION:
John Burzynski
Chief Executive Officer
Telephone (416) 363-8653


Stock Information

Company Name: Osisko Mining Inc.
Stock Symbol: OSK:CC
Market: TSXC
Website: osiskomining.com

Menu

OSK:CC OSK:CC Quote OSK:CC Short OSK:CC News OSK:CC Articles OSK:CC Message Board
Get OSK:CC Alerts

News, Short Squeeze, Breakout and More Instantly...