Endurance Reports an Impressive Deep Drill Intersection at Imperial with 6.74 gpt Gold over 21.8 m Including 10.11 gpt Gold & 0.25% Antimony over 12.4 m
MWN-AI** Summary
Endurance Gold Corporation has reported significant drilling results from the Reliance Gold Project, specifically from drill hole DDH25-109 at the Imperial Zone. The assay results revealed an impressive gold intersection of 6.74 grams per tonne (gpt) over a length of 21.8 meters, which included a particularly high-grade segment of 10.11 gpt gold over 12.4 meters. This drilling marks a critical exploration advancement, as it fills a previously undrilled 185-meter gap along the Royal Shear structure and confirms the continuity and strength of mineralization previously detected in nearby drilling.
Noteworthy highlights from DDH25-109 include additional high-grade results, such as 7.89 gpt gold over 1.0 meter and 54.90 gpt gold over 0.8 meters at greater depths. The hole also confirmed mineralization in the Lower Imperial gabbro zone, returning 18.90 gpt gold over 0.9 meters, showcasing the potential for expansive high-grade mineralization at deeper levels.
Robert T. Boyd, the President & CEO of Endurance Gold, emphasized that the results from this hole are among the top ten best intersections recorded at Reliance, indicating heightened tonnage and size potential along the extensive strike and vertical extent of the Royal Shear system. The ongoing 2025 drilling program has completed four holes totaling nearly 2,000 meters, with further drilling extending past the Imperial Zone into adjacent areas. Alongside drilling activities, the company is engaged in resource modeling and soil sampling, aimed at identifying additional mineralization opportunities in the region.
Overall, these findings position Endurance Gold as a firm poised for significant exploration success in the competitive gold market.
MWN-AI** Analysis
Endurance Gold Corporation (TSXV: EDG) has recently reported significant assay results from their ongoing drilling program at the Reliance Gold Project, notably drill hole DDH25-109, which returned greatly encouraging metrics, including 6.74 grams per tonne (gpt) gold over 21.8 meters and 10.11 gpt gold over 12.4 meters. These results, particularly within the Imperial Zone, underline the continuity of high-grade mineralization that is now evident along a substantial length of the Royal Shear structure, which remains open for further exploration.
Investors should take these results as a bullish indicator for Endurance Gold. The fact that the mineralization is continuously present from surface to a depth of 530 meters strengthens the case for future drilling, which is already in progress targeting extensions along strike. High-grade intersections, such as 7.89 gpt gold over 1.0 meter and 54.90 gpt gold over 0.8 meters, contribute further to potential resource expansion, enhancing positive sentiment around the stock.
Moreover, the exploration at the Reliance Gold Project appears to be well organized, with ongoing resource modeling and metallurgical assessments being conducted. This oversight indicates a commitment to rigor and ensuring that investor expectations are managed with credible and technical backing. The presence of antimony alongside the gold is also noteworthy, as it implies additional economic potential and could attract diverse market interest.
Given the ongoing activity and the positive drill results, a favorable investment outlook for Endurance Gold is justified. Investors might consider taking a position in EDG, especially following any rapid price fluctuations that may typically occur around news releases, while watching for subsequent assay results from the other completed drill holes in the 2025 program. As always, diversification and cautious investment practices should be applied.
**MWN-AI Summary and Analysis is based on asking OpenAI to summarize and analyze this news release.
Vancouver, British Columbia--(Newsfile Corp. - June 23, 2025) - Endurance Gold Corporation (TSXV: EDG) (OTCQB: ENDGF) (FSE: 3EG) (the "Company") is pleased to announce assay results from its first 2025 drill hole at the Reliance Gold Project. Drill hole DDH25-109 successfully intersected a wide strongly mineralized portion of the Imperial Zone within a 185 metre ("m") undrilled gap of the Royal Shear. In addition, this hole tested and intersected the up-dip extension of the gabbro-hosted Lower Imperial Discovery which was previously reported in hole DDH24-106.
Highlights include:
- DDH25-109 returned 6.74 grams per tonne ("gpt") gold and 0.16% antimony ("Sb") over 21.8 m, including 10.11 gpt gold and 0.25% Sb over 12.4 m from the Imperial Zone commencing at 336 m downhole depth.
- This approximate true width intersection is a 65 m up-dip step-out from DDH24-106 that returned 3.51 gpt gold over 6.7 m (see news release December 16, 2024).
- Successfully discovered a wide high-grade portion of Imperial Zone at depth.
- Excellent high-grade sample-to-sample continuity through the 12.4 m higher grade portion of this intersection (see Figure 1 below).
- Confirms strong lateral mineralization continuity within a previously undrilled 185 m gap at Imperial.
- Imperial Zone is now demonstrated to be continuously mineralized from surface to 530 m down-dip.
- The Imperial Zone remains open to expansion down-dip and along strike to the northwest and southeast. Testing extensions along strike to the southeast are in progress.
- Other high-grade veins intersected in this hole include:
- 7.89 gpt gold over 1.0 m commencing at 380 m downhole depth
- 54.90 gpt gold over 0.8 m commencing at 400.7 m downhole depth.
- Extension of the Lower Imperial "Gabbro" Zone confirmed:
- The same hole intersected 18.90 gpt gold and 0.16% Sb over 0.9 m commencing at 534 m downhole depth about 120 m up-dip from the Lower Imperial "Gabbro hosted" discovery in DDH24-106 returning 7.18 gpt gold over 8.3 m, including 28.08 gpt gold over 1.7 m.
- Thicker sequences of gabbro with gold bearing structures are confirmed at depth and the mineralized structures in the footwall of the Royal Shear remain open for expansion in all directions.
"The impressively mineralized Royal Shear structure continues to deliver with another excellent drill intersection," stated Robert T. Boyd, President & CEO of Endurance Gold Corporation. "These results from DDH25-109 fall within the top ten best intersections drilled to date at Reliance and this hole continues to grow the size and tonnage potential along the 1.5 km strike and 1.1 km vertical extent of the Royal Shear gold-antimony system."
The 2025 diamond drilling program has four holes completed to date for a total of 1,975 m drilled. Results are pending for the three completed holes. Drilling is active in the area between the Imperial and Lower Crown zones to extend the mineralized trends along strike and near to surface.
All drill assay results are reported as core length intervals. True composite widths are estimated at 90% to 100% of core length. Highlighted intervals are reported in Table 1 below and 2025 target areas are shown on the Royal Shear inclined longitudinal section in Figure 2 and Imperial Zone Cross Section in Figure 3.
In other ongoing activities, mineral resource modeling is progressing and representative metallurgical samples are being collected for upcoming testwork. Soil sampling, prospecting, and geological mapping are ongoing on the eastern Olympic structures and the southeast extension of the Royal Shear Trend. Approximately 1,000 soil samples have been collected to date.
Endurance Gold Corporation is a company focused on the acquisition, exploration and development of highly prospective North American mineral properties with the potential to develop world-class deposits.
ENDURANCE GOLD CORPORATION
Robert T. Boyd, President & CEO
FOR FURTHER INFORMATION, PLEASE CONTACT
Endurance Gold Corporation www.endurancegold.com
Toll Free: (877) 624 2237, info@endurancegold.com
Diamond drill core was logged and evaluated on the Property and samples designated for assay analysis under the supervision of a geologist at the property. Drilling was completed with HQ and NQ size tools capable of collecting 6.35 and 4.76 centimetre diameter core (respectively). Drill core was cut using a diamond saw with one half of the core sent for analysis and the remaining kept for future studies. All drill core samples have been submitted to ALS Global in North Vancouver, BC, an ISO/IEC 17025:2017 accredited laboratory, where they are crushed to 70% <2 mm then up to 250 gram pulverized to <75 microns. Samples are then submitted for four-acid digestion and analyzed for 48 element ICP-MS (ME-MS61) and gold 30g FA ICP-AES finish (AU-ICP21). Over limit samples returning greater than 10 parts per million ("ppm") gold are re-analyzed by Au-GRA21 methodology and overlimit antimony returning greater than 10,000 ppm Sb are re-analyzed by Sb-AA08 methodology. Samples with Visible Gold are re-analysed by metallics screening method Au-SCR21 which incorporates a 1 kg pulp screened to 100 microns and includes assaying of the entire oversize fraction.
Endurance Gold monitors QA/QC by inserting blanks, certified standards and pulp duplicates into the sample stream. The work program is supervised by Darren O'Brien, P.Geo., Vice President Exploration for the Company and the qualified person as defined in National Instrument 43-101. Mr. O'Brien has reviewed and approved this news release.
Neither the TSX Venture Exchange nor its Regulation Services Provider (as that term is defined in the policies of the TSX Venture Exchange) accepts responsibility for the adequacy or accuracy of this news release. This news release may contain forward looking statements based on assumptions and judgments of management regarding future events or results that may prove to be inaccurate as a result of factors beyond its control, and actual results may differ materially from the expected results.
Table 1 - 2025 Significant Composite DDH Assays Results
| Hole number | From | To | Width | Au ppm | Sb % |
| DDH25-109 | 336.0 | 357.8 | 21.8 | 6.74 | 0.16 |
| includes | 339.3 | 351.7 | 12.4 | 10.11 | 0.25 |
| DDH25-109 | 380.0 | 381.0 | 1.0 | 7.89 | 0.02 |
| DDH25-109 | 400.7 | 401.5 | 0.8 | 54.90 | 0.03 |
| DDH25-109 | 534.0 | 534.9 | 0.9 | 18.90 | 0.16 |
Figure 1: Reliance Property - DDH25-109 Imperial Zone - Individual Assay Results
To view an enhanced version of this graphic, please visit:
https://images.newsfilecorp.com/files/4976/256421_5ee0c1bd04789a93_002full.jpg
Figure 2: Reliance Property - Royal Shear Inclined Longitudinal - 2025 Drill Targeting Areas
To view an enhanced version of this graphic, please visit:
https://images.newsfilecorp.com/files/4976/256421_5ee0c1bd04789a93_003full.jpg
Figure 3: Reliance Property - Royal Shear - Imperial Zone Cross-Section
To view an enhanced version of this graphic, please visit:
https://images.newsfilecorp.com/files/4976/256421_5ee0c1bd04789a93_004full.jpg
To view the source version of this press release, please visit https://www.newsfilecorp.com/release/256421
FAQ**
How could the recent assay results from Endurance Gold Corporation EDG:CC at the Reliance Gold Project impact the local mining industry in Vancouver, BC?
What are the potential economic implications for Vancouver if Endurance Gold Corporation EDG:CC successfully expands the Imperial Zone's mineralization as indicated by their drilling results?
In what ways might the exploration activities of Endurance Gold Corporation EDG:CC influence real estate and investment trends in the Vancouver area?
How does the gold-antimony system discovered by Endurance Gold Corporation EDG:CC align with broader mining trends in British Columbia, and what might this mean for future investment opportunities in Vancouver?
**MWN-AI FAQ is based on asking OpenAI questions about Endurance Gold Corporation (TSXVC: EDG:CC).
NASDAQ: EDG:CC
EDG:CC Trading
-9.46% G/L:
$0.335 Last:
130,115 Volume:
$0.35 Open:
