PPG completes 200th dry docking using electrostatic application
MWN-AI** Summary
PPG (NYSE: PPG) has achieved a significant milestone by completing its 200th vessel dry docking utilizing its innovative electrostatic application method for marine fouling control coatings. This advancement, introduced to the global shipping industry nearly three years ago, was demonstrated in a recent project on the Stena Britannica, a passenger and roll-on/roll-off cargo vessel operated by Stena Line, at the EDR Antwerp shipyard in Belgium. The PPG SIGMAGLIDE ® 2390 fouling release coating, which is silicone-based and free from biocides, was applied using an electrostatic spray gun.
This cutting-edge application technique directs coating particles onto a grounded surface, resulting in improved transfer efficiency and a notable reduction in overspray, material waste, and carbon emissions when compared to traditional methods. PPG’s approach contributes to sustainability in an industry responsible for approximately 3% of global greenhouse gas emissions. Stena Line's COO, Dennis Tetzlaff, emphasized the importance of reducing their carbon footprint and highlighted the collaboration with PPG as essential to adopting sustainable solutions.
Moreover, the electrostatic application method not only enhances operational efficiency by lowering fuel consumption and Scope 1 emissions through the high-performance properties of the PPG SIGMAGLIDE 2390 coating but also achieves significant Scope 3 carbon life cycle savings. Jan Willem Tegelaar, PPG global marine platform director, stated that this milestone reflects successful industry collaboration that fosters sustainability in marine coatings. PPG remains committed to providing innovative solutions that help shipowners reduce their environmental impact while enhancing operational performance.
For more information about PPG’s offerings in Protective and Marine Coatings, visit ppgpmc.com.
MWN-AI** Analysis
PPG Industries (NYSE: PPG) recently marked a significant milestone by completing its 200th vessel dry docking utilizing its innovative electrostatic application of marine fouling control coatings. This breakthrough not only enhances operational efficiency but also offers substantial sustainability benefits that should attract attention from investors and shipowners alike.
The application method employed, using the PPG SIGMAGLIDE® 2390 fouling release coating, showcases enhanced transfer efficiency compared to traditional techniques. By minimizing overspray and reducing material waste, the electrostatic application process helps decrease carbon emissions, aligning with increasing regulation and environmental scrutiny in the shipping industry. Notably, this is critical as shipping contributes approximately 3% of global greenhouse gas emissions.
PPG's collaboration with Stena Line, a major player in the ferry sector, illustrates the tangible benefits of sustainability-focused partnerships. With Stena Line targeting a 30% reduction in CO2 emissions by 2030, the adoption of PPG's advanced coatings provides both operational and lifecycle carbon savings, significantly lowering overall carbon footprints.
For investors, PPG represents a compelling opportunity in the coatings market, particularly as maritime operators increasingly favor eco-friendly technologies. This milestone demonstrates PPG's commitment to innovation and sustainability, potentially enhancing its competitive advantage within the marine coatings sector.
As shipowners seek solutions to meet regulatory pressures and reduce operational costs, PPG's offerings, such as SIGMAGLIDE, provide a dual benefit—enhancing fuel efficiency while lowering emissions. As global shipping transitions towards greener technologies, stakeholders should consider PPG as a key player poised for growth in an evolving market landscape focused on sustainability.
In conclusion, investors should monitor PPG’s advancements and partnerships closely, as their integrated solutions cater not only to present market demands but also to future environmental considerations, solidifying their position in a rapidly changing industry.
**MWN-AI Summary and Analysis is based on asking OpenAI to summarize and analyze this news release.
Breakthrough method delivers significant sustainability gains for ship owners, yards
PPG (NYSE: PPG) today announced the completion of its 200th vessel dry docking using electrostatic application of marine fouling control coatings, nearly three years after introducing the technique to the global shipping market.
This press release features multimedia. View the full release here: https://www.businesswire.com/news/home/20260310875015/en/
PPG completes 200th dry docking using electrostatic application, a breakthrough method that delivers significant sustainability gains for ship owners and yards.
The project was completed on the Stena Britannica, a passenger and roll-on/roll-off cargo vessel operated by Stena Line, one of the world’s largest ferry companies, at the EDR Antwerp shipyard in Belgium. The team applied PPG SIGMAGLIDE ® 2390 fouling release coating, a silicone-based, biocide-free solution, using the electrostatic application method.
The application technique uses an electrostatic spray gun to guide coating particles onto a grounded metal surface, delivering even coverage and uniform film layers that help enhance smoothness and fouling control performance. Compared to traditional airless spray methods, electrostatic application improves paint transfer efficiency and significantly reduces overspray, material waste and carbon emissions.
“In an industry that makes up 3% of global greenhouse gas emissions, we take responsibility for our impact on the environment. Our target is to reduce CO2 emissions from our vessels by 30% by 2030, based on a 2019 baseline,” said Dennis Tetzlaff, chief operating officer, Fleet, at Stena Line. “We are taking substantial steps to drive down our carbon footprint and decrease any negative impact on biodiversity. Collaborating with partners like PPG allows us to adopt solutions that help address global challenges.”
Electrostatic application also offers Scope 3 carbon life cycle savings compared to traditional application methods, since fewer raw materials need to be extracted, manufactured or transported. These reductions are in addition to the operational carbon savings achieved by vessels coated with high-performance, low-friction solutions such as PPG Sigmaglide 2390 coating, which help ship owners reduce fuel consumption and Scope 1 emissions.
“This 200th electrostatic application milestone demonstrates how industry collaboration can drive real sustainability progress in marine coatings,” said Jan Willem Tegelaar, PPG global marine platform director, Protective and Marine Coatings. “Working with Stena Line from the start of this journey, we have delivered solutions that help shipyards and operators reduce both operational and embodied carbon footprints. With our premium hull-coating technologies, such as the PPG Sigmaglide 2390 coating designed for electrostatic application, PPG is the only marine coatings provider offering both types of carbon-reduction benefits in one integrated solution.”
To learn more about PPG’s Protective and Marine Coatings business, visit ppgpmc.com .
Stena Line
Stena Line is one of Europe's leading ferry companies with approximately 40 vessels and 20 routes in Northern Europe and the Mediterranean, operating 34,700 sailings each year. Stena Line is an important part of the European logistics network and develops new intermodal freight solutions by combining transport by rail, road and sea. Stena Line also plays an important role in tourism in Europe with its extensive passenger operations. The company is family-owned, was founded in 1962 and is headquartered in Gothenburg. Stena Line has 6,550 employees and an annual turnover of 19.6 billion SEK.
PPG: WE PROTECT AND BEAUTIFY THE WORLD®
At PPG (NYSE:PPG), we work every day to develop and deliver the paints, coatings and specialty products that our customers have trusted for more than 140 years. Through dedication and creativity, we solve our customers’ biggest challenges, collaborating closely to find the right path forward. With headquarters in Pittsburgh, we operate and innovate in more than 50 countries and reported net sales of $15.9 billion in 2025. We serve customers in construction, consumer products, industrial and transportation markets and aftermarkets. To learn more, visit ppg.com .
The PPG Logo and We Protect and Beautify the World are registered trademarks of PPG Industries Ohio, Inc.
Sigmaglide is a registered trademark of PPG Coatings Nederland B.V.
View source version on businesswire.com: https://www.businesswire.com/news/home/20260310875015/en/
PPG Media Contact:
Zachary Madden
PPG Protective and Marine Coatings
+1 412 328 1104
Zmadden@ppg.com
www.ppg.com
FAQ**
How does PPG's electrostatic application technique compare to traditional methods in terms of sustainability gains for ship owners like Stena Line, especially in relation to "WeWork Inc. Class A WE"?
What specific measures has Stena Line implemented to reach its target of reducing CO2 emissions by 30% by 2030 in collaboration with PPG's technologies, and how might this affect their financial outlook akin to "WeWork Inc. Class A WE"?
Can you elaborate on the potential financial impacts for shipyards and operators adopting PPG's high-performance coatings, considering the sustainability gains similar to those discussed in "WeWork Inc. Class A WE"?
How does the success of PPG's 200th vessel dry docking using the electrostatic method influence market perceptions of sustainability in the shipping industry, and could this parallel trends seen in companies like "WeWork Inc. Class A WE"?
**MWN-AI FAQ is based on asking OpenAI questions about PPG Industries Inc. (NYSE: PPG).
NASDAQ: PPG
PPG Trading
0.29% G/L:
$102.09 Last:
675,363 Volume:
$101.96 Open:
